Metazeal®-s

Metazeal-s a UV stable, pre-formed closed-cell, low-density PE (polyethylene) foam joint seal. The material is typically used as an expansion joint seal or gasket in bridge decks, commercial buildings, parking decks, water treatment facilities, and other industrial applications. Metazeal-s has a higher maximum operating temperature, 212°F when compared to our other pre-formed closed cell foam solutions. When installed within the Ceva Joint Systems, this material acts as a water tight, seismic expansion joint seal.

Additional features include applications in hydrostatic environments. This material can be installed in ponding/standing water. Metazeal-s material is safe for use in potable and processed water applications.

Metazeal-s meets ADA criteria for ground and floor surfaces as stated in the rules and regulations section of the Federal Register Volume 58 no.144, US Access Board.

FEATURES BENEFITS
Dynamic movement range of
-50%, +25% & ±50% shear
Seismic expansion joint seal
Waterproof Can be used in below grade applications
Withstand up to 70 ft. of head pressure Ideal for stage construction or segmental repairs
Maximum operating temperature of 212°F Can be used in high heat applications
Ease of installation No anchoring system required, reduced installation time and labor costs
Field directional changes & heat welds Up to 3 hours of passive fire protection

USES
Applications

  • Expansion joints
  • Seismic joints
  • Gaskets
  • Seismic retrofit
  • Cast-in-place joints

Locations

  • Bridges/Highways/Tunnels/Airport Runways
  • Commercial Buildings
  • Water Treatment Facilities
  • Tanks/Pools
  • Industrial Facilities
  • Parking Garages

Substrate

  • Concrete
  • Elastomeric concrete
  • Steel
  • Wood

Downloads

Datasheets

Metazeal-s Datasheet (.pdf)

SDS

For up-to-date documentation, please contact us.