Silicone Encapsulation Solutions 2C51

Silicone Encapsulation Solutions 2C51

HumiSeal® 2C51 encapsulant is:

  • Silicone-based
  • Light-green
  • 2 components

HumiSeal® 2C51 encapsulant has:

  • No VOCs or solvent
  • Excellent mechanical shock resistance
  • Superior adhesion to a variety of substrates
  • 1-1 mix ratio

Application of HumiSeal® 2C51 encapsulant

Cleanliness of the substrate is of extreme importance for the successful application of HumiSeal 2C51. Surfaces must be free of moisture, dirt, wax, grease, flux residues and all other contaminants. Encapsulants can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue “no clean” materials.  Users should perform adequate testing to confirm compatibility between the encapsulants and their particular assembly materials, process conditions and cleanliness level.

HumiSeal® 2C51 is a 2 component with a heat-option silicone system designed to be used for hard coat applications.

Technical or Safety Data Sheet | Free Sample

Chemistry Silicone
Viscosity Part A (CPs) 275
Viscosity Part B (CPs) 550
Mix Ratio 1:1
Pot Life (min)* 10
Handling Time (min)* 20
Full Cure** 1 hr @ RT or 30 mins @70ºC
Cure Type 2 component with heat option
Color Light-green
Hardness 00-45
Operating Temp (°C) -50 to 200º C
Applications Sealing, potting, encapsulations
Substrates Metals, Ceramics, Plastic, Cable, Wire

Request a Adhesive Solution Free Sample

Contact Us