Urethane Acrylate Encapsulation Solution UV12

Urethane Acrylate Encapsulation Solution UV12

HumiSeal® UV12 encapsulant is:

  • One component UV curable
  • Water-clear LED encapsulant
  • Fast-curing

HumiSeal® UV12 encapsulant has:

  • No VOCs or solvent
  • Superior adhesion to a variety of substrates
  • RoHS and REACH compliance

Application of HumiSeal® UV12 encapsulant

Cleanliness of the substrate is of extreme importance for the successful application of HumiSeal UV12. Surfaces must be free of moisture, dirt, wax, grease, flux residues and all other contaminants. Encapsulants can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue “no clean” materials.  Users should perform adequate testing to confirm compatibility between the encapsulants and their particular assembly materials, process conditions and cleanliness level.

HumiSeal® UV12 is a fast curing, water white clear, rigid encapsulant for LED and other optical application. This product requires direct UV exposure during cure.

Technical or Safety Data Sheet | Free Sample

Chemistry Urethane Acrylate
Viscosity Part A (CPs) 2,500
Viscosity Part B (CPs) N/A
Mix Ratio N/A
Pot Life (min)* Until exposed to UV
Handling Time (min)* 30 sec with UV exposure
Full Cure** 1 – 2 J/cm2
Cure Type UV Cure
Color Clear
Hardness D80
Operating Temp (°C) -50 to 120 C
Applications LED encapsulation; light arrays
Substrates LED encapsulation; light arrays

Request a Adhesive Solution Free Sample

Contact Us