Epoxy Adhesive 2E24
HumiSeal® 2E24 is:
- 2 component epoxy-based
- High viscosity/thixotropic
- Moisture resistant
HumiSeal®2E24 has:
- No VOCs or solvent
- 1:1 mix ratio, long-work life
- Excellent mechanical and thermal shock resistance
- Superior adhesion to a variety of substrates
- RoHS and REACH compliance
Application of HumiSeal®2E24
Cleanliness of the substrate is of extreme importance for the successful application of HumiSeal 2E24. Surfaces must be free of moisture, dirt, wax, grease, flux residues and all other contaminants. Adhesives can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue “no clean” materials. Users should perform adequate testing to confirm compatibility between the adhesives and their particular assembly materials, process conditions and cleanliness level.
HumiSeal® 2E24 is an epoxy intended for low temperature or wet industrial bonding. This translucent, two-part, thixotropic system cures quickly at room temperature with low shrinkage. 2E24 develops tough, strong bonds to metals, phenolic plastics, polyesters, glass, glass fabrics, hardboards, products, ceramics, rubber, masonry, materials, and other construction materials while providing excellent insulation.
Request Data Sheets | Free Sample
Chemistry | Epoxy | |
Viscosity Part A (CPs) | 150,000 | |
Viscosity Part B (CPs) | 50,000 | |
Mix Ratio | 1:1 | |
Pot Life (min)* | 5 | |
Handling Time (min)* | 7 | |
Full Cure** | 1hr @ RT or 20 mins @ 65° C | |
Cure Type | 2 component with heat option | |
Color | Translucent | |
Hardness | D85 | |
Operating Temp (°C) | -60 to 125 C | |
Applications | Multiple | |
Substrates | Metals, Glass, Ceramics, Plastic |
Other products in this chemistry include: