Core Wrap & Separator Tape

Core Wrap & Separator Tape

Construction

Single or multi-layer films (polyester, polyethylene, or polyimide) or aramid paper with optional colored or adhesive coatings or films.

General Features/Benefits

  • Protect conductors from penetration of moisture, chemicals, and jacket compound
  • Maintain cable concentricity and firmness of conductor bundles
  • Isolate pairs
  • Provide dielectric insulation

Our Product Lines

1230
Heat sealable binding and insulating tape which fuses to polyethylene. Typically used in multiconductor cables to protect conductors from cable filling materials and jacketing compounds.

  • 0.00048″ (12µ) polyester film
  • 0.00100″ (25µ) polyethylene film

Sample | Data Sheets

6310
Pressure sensitive binding & insulating tapes typically used in multipair cable to protect conductors from cable filling materials and jacketing compounds.

  • 0.00092″ (23µ) polyester film
  • 0.00050″ (13µ) pressure sensitive adhesive

Sample | Data Sheets

6315

Pressure sensitive binding and insulating tape which is typically used in multiconductor cable to protect conductors from cable filling materials and jacketing compounds

  • 0.00142” (36μ) polyester film
  • 0.00050” (13μ) pressure sensitive adhesive

Sample | Data Sheets

6520

Colored heat sealable binding and insulating tape which fuses on both sides to PVC and itself.

  • 0.00020” (5μ) PVC heat seal coating
  • 0.00092” (23μ) polyester film
  • 0.00020” (5μ) PVC heat seal coating

Sample | Data Sheets

COR142
A polyester film corrugated in the longitudinal direction that is typically used as a binder for multi-conductor energy cables. The corrugation feature of the film provides cushioning, which allows it to be used as a substitute for woven bedding tapes.

  • 0.00140″(36µ) corrugated polyester film

Sample | Data Sheets

COR200
A polyester film corrugated in the longitudinal direction that is typically used as a binder for multi-conductor energy cables. The corrugation feature of the film provides cushioning, which allows it to be used as a substitute for woven bedding tapes.

  • 0.00200” (51μ) corrugated polyester film

Sample | Data Sheets

COR300
A polyester film corrugated in the longitudinal direction that is typically used as a binder for multi-conductor energy cables. The corrugation feature of the film provides cushioning, which allows it to be used as a substitute for woven bedding tapes.

  • 0.00300” (76μ) corrugated polyester film

Sample | Data Sheets

FM100S

Lighter grade heat sealable separator tape used to separate copper conductors, such as motor lead wires and a variety of other applications. Heat sealable copolymer bonds to PVC, polyethylene, and aluminum.

  • 0.00048” (12μ) polyester film
  • 0.00120” (30μ) heat sealable copolymer

Sample | Data Sheets

FM100
Lighter grade heat sealable separator tape used to separate copper conductors, such as motor lead wires and a variety of other applications. Heat sealable copolymer bonds to PVC, polyethylene, and aluminum.

  • 0.00048” (12μ) polyester film
  • 0.00120” (30μ) heat sealable copolymer

Sample | Data Sheets

FM200

Medium grade heat sealable separator tape used to separate copper conductors, such as motor lead wires and a variety of other applications. Heat sealable copolymer bonds to PVC, polyethylene, and aluminum.

  • 0.00092” (23μ) polyester film
    0.00100” (25μ) heat sealable copolymer

Sample | Data Sheets

FM300
Heavier grade heat sealable separator tape used to separate copper conductors, such as motor lead wires and a variety of other applications. Heat sealable copolymer bonds to PVC, polyethylene, and aluminum.

  • 0.00200” (51μ) polyester film
  • 0.00100” (25μ) heat sealable copolymer

Sample | Data Sheets

KT100

Polyimide core wrap for high-temperature applications

  • 0.001” (25μ) polyimide film

Sample | Data Sheets

M100C

Colored, slit film which wraps and binds conductors, separating them from cable fillers. Color coating provides easy verification of tape removal at termination of Power Cables

  • 0.00200” (51μ) polyester film
  • 0.00100” (25μ) heat sealable copolymer

Sample | Data Sheets

M100P

Heat sealable bonding and insulation tape that seals to itself and PVC. Typically used as a fusible core wrap in twisted pair constructions.

  • 0.00092” (23μ) white pigmented polyester film

Sample | Data Sheets

M100C

Colored, slit film which wraps and binds conductors, separating them from cable fillers. Color coating provides easy verification of tape removal at termination of Power Cables

  • 0.00200” (51μ) polyester film
  • 0.00100” (25μ) heat sealable copolymer

Sample | Data Sheets

M100P

Heat sealable bonding and insulation tape that seals to itself and PVC. Typically used as a fusible core wrap in twisted pair constructions.

  • 0.00092” (23μ) white pigmented polyester film

Sample | Data Sheets

M100

Slit film which wraps and binds conductors, separating them from cable fillers and jacketing materials.

  • 0.00092″ (23µ) polyester film

Sample | Data Sheets

M100P

Heat sealable bonding and insulation tape that seals to itself and PVC. Typically used as a fusible core wrap in twisted pair constructions.

  • 0.00092” (23μ) white pigmented polyester film

Sample | Data Sheets

M150

Slit film which wraps and binds conductors, separating them from cable fillers and jacketing materials.

  • 0.00142” (36μ) polyester film

Sample | Data Sheets

M200C

Colored, slit film which wraps and binds conductors, separating them from cable fillers. Colored coating provides easy verification of tape removal at termination in typical applications such as power cable.

  • 0.00200” (50μ) polyester film
  • 0.00010” (2μ) colored coating

Sample | Data Sheets

M200EP

A white polyester film which wraps and binds conductors, separating them from cable fillers and jacketing materials.”

  • 0.00200” (51μ) pigmented polyester film

Sample | Data Sheets

M200L

Colored, slit film which wraps and binds conductors, separating them from cable fillers. Laminated color provides encapsulated, abrasion resistant verification of tape removal at termination in typical applications such as Power Cables

  • 0.00092” (23μ) polyester film
  • 0.00092” (23μ) polyester film

Sample | Data Sheets

M200P

Heat sealable bonding and insulation tape that seals to itself and PVC. Typically used as a fusible core wrap in twisted pair constructions.

  • 0.00200” (51μ) pigmented polyester film

Sample | Data Sheets

M200

Slit film which wraps and binds conductors, separating them from cable fillers and jacketing materials.

  • 0.00200″ (51µ) polyester film

Sample | Data Sheets

M300

Slit film which wraps and binds conductors, separating them from cable fillers and jacketing materials.

  • 0.00300″ (76µ) polyester film

Sample | Data Sheets

M400L

Colored, slit film which wraps and binds conductors, separating them from cable fillers. Laminated color provides encapsulated, abrasion resistant verification of tape removal at termination in typical applications such as power cables.

  • 0.00200” (51μ) polyester film
  • 0.00200” (51μ) polyester film

Sample | Data Sheets

M400

Slit film which wraps and binds conductors, separating them from cable fillers and jacketing materials. Typically used in multiconductor cables.

  • 0.00400” (102μ) polyester film

Sample | Data Sheets

M500

Slit film which wraps and binds conductors, separating them from cable fillers and jacketing materials. Typically used in multiconductor cables.

  • 0.00500” (127μ) polyester film

Sample | Data Sheets

M50CX

High yield heat sealable bonding and insulation tape that seals to itself and to PVC. Typically used as fusible core wrap in twisted pair constructions.

  • 0.00048” (12μ) co-extruded polyester film

Sample | Data Sheets

M50C

Colored, slit film which wraps and binds conductors, separating them from cable fillers. The colored coating provides easy verification of tape removal at termination in typical applications such as power cables.

  • 0.00048” (12μ) polyester film
  • 0.00010” (3μ) colored coating

Sample | Data Sheets

M50E

High yield, heat sealable, slit film which wraps and binds conductors, separating them from cable fillers. Specifically designed to bond to olefin substrates.

  • 0.00048” (12µ) polyester film
  • 0.00020” (5µ) heat seal coating

Sample | Data Sheets

M50

Slit film which wraps, insulates, and binds conductors, separating them from cable fillers and jacketing materials

  • 0.00048″ (12µ) polyester film

Sample | Data Sheets

M75

0.00075” (19μ) polyester filmSlit film which wraps and binds conductors, separating them from cable fillers and jacketing materials.

  • 0.00075” (19μ) polyester film

Sample | Data Sheets

M80CX

Heat sealable bonding and insulation tape that seals to itself and to PVC. Typically used as a fusible core wrap in twisted pair constructions.

  • 0.00080” (20μ) co-extruded polyester film

Sample | Data Sheets

MSDSNWP150

Material Safety Data Sheet NWP150

Sample | Data Sheets

MT050C

High yield, heat sealable, slit film which wraps and binds conductors, separating them from cable fillers. Heat sealable to polyester, aluminum and itself.

  • 0.00048” (12μ) polyester film
  • 0.00050” (13μ) heat seal coating

Sample | Data Sheets

MT150C

High yield, heat sealable, slit film which wraps and binds conductors, separating them from cable fillers. Heat sealable to polyester, aluminum and itself.

  • 0.00142” (36μ) polyester film
  • 0.00050” (13μ) heat seal coating

Sample | Data Sheets

N96250

A flame retardant binder tape primarily used in the SEU and SER service entrance cables.

  • 0.00048” (12μ) polyester film
  • 0.00400” (102μ) fiberglass scrim

Sample | Data Sheets

N96292

A flame retardant binder tape primarily used in the SEU and SER service entrance cables.

  • 0.00092” (23μ) polyester film
  • 0.00400” (102μ) fiberglass scrim

Sample | Data Sheets

NT200

High-temperature resistant slit aramid paper which wraps and binds conductors, separating them from cable fillers and jacketing materials.

  • 0.00230″ (58µ) Nomex® aramid paper

Sample | Data Sheets

NT300

High-temperature resistant slit aramid paper which wraps and binds conductors, separating them from cable fillers and jacketing materials.

  • 0.00310″ (79µ) Nomex® aramid paper

Sample | Data Sheets

NWP150

Polyester nonwoven that is typically used as a core wrap over multiconductor constructions

  • 0.00140” (36μ) nonwoven polyester

PP400

Slit film which binds and insulates conductors

  • 0.004” (102μ) polypropylene film

PP500

Cost effective, foamed polypropylene slit film which wraps and binds conductors, separating them from cable fillers.

  • 0.00520” (132μ) foamed polypropylene film

PP350

High yield, cost-effective, foamed polypropylene slit film which wraps and binds conductors, separating them from cable fillers.

  • 0.00370” (94μ) foamed polypropylene film

PB100

High yield slit film which wraps and binds conductors, separating them from cable fillers.

  • 0.00090” (23μ) biaxially oriented polypropylene film

PP200

High yield, slit film which binds and insulates conductors

  • 0.002” (51μ) polypropylene film
Contact Us