Solventborne Polyurethane Solutions
Applications:
- Wood Coatings
- Plastic Coatings
- Specialty Applications
Useful links
Moisture Cure Polyurethanes
MC 40P
Aromatic, hard coating for wood and concrete
- Viscosity ASTM: 70-120 cps
- Solids 7.0-8.50
- VOC:4.86 (585)
- NCO:2.7-3.0
- Sward Hardness: 38
- Tensile: 5,000
- Elongation: 85%
MC 53-1
Aromatic, hard coating for wood and concrete, <350 grams per liter VOC
- Viscosity ASTM: 70-130 cps
- Solids 40-43%
- VOC: 2.48 (298)
- NCO:2.8-3.7
- Sward Hardness: 40
- Tensile: 4,500
- Elongation: 85%
MC 75
Aromatic, hard coating for wood and concrete
- Viscosity ASTM: 60-125 cps
- Solids 39-41%
- VOC: 4.81 (576)
- NCO:2.5-3.1
- Sward Hardness: 38
- Tensile: 5,000
- Elongation: 85%
Solvent Borne Polyurethanes
QC 4820
Aliphatic, polyester, excellent adhesion to polycarbonate and vinyl without damage to the substrate
- Viscosity ASTM: 70-120 cps
- Solids 26-28%
- Solvents:PM Solvent, Xylol, Ethanol
- Tensile: 6,000-12,000
- Elongation: 450-500%
Solvent-based Polyurethane Laquers
QC 4820
Aromatic, hard coating for wood and concrete
- Viscosity ASTM: 6,000-12,000 cps
- Solids 26-28%
- Solvent: PM, Solvent, Xylol, Ethanol
- Tensile: 6,000-12,000
- Elongation: 450%-500%
QC 4830
Aliphatic polyester, excellent adhesion to polycarbonate and vinyl without damage the substrate
- Viscosity ASTM: 1,300-3,000 cps
- Solids 21.5-24.5%
- Solvent: PM, Solvent, Xylol, Ethanol & Isopropyl
- Tensile: 6,000-10,000
- Elongation: 400%-500%
QC 4891
Aliphatic, polyester, slow evaporation rate and dry time; ideal for graphic arts, screen printing, and fabric coating
- Viscosity ASTM: 7,000-11,000 cps
- Solids 24.5-26%
- Solvent: Diacetone, Alcohol, EEP, DPGME, DPM
- Tensile: 7,000-11,000
- Elongation: 350%-400%
QC 3781
Aromatic, ideal for lamination of vinyl and nylon
- Viscosity ASTM: 12500-25,000 cps
- Solids 39-41%
- Solvent:Toluene, MEK
- Tensile: 2,400-3,600
- Elongation: 675%-525%
QC 4849
Aromatic, polyester base resin for film adhesives, thermoplastic, excellent heat reactivation properties
- Viscosity ASTM: 3,600-6,000 cps
- Solids 24-26%
- Solvent: Toluene, MEK
- Tensile: 2,600-5,000
- Elongation: 475%-525%
