Maflowrap – Fabric Backed Bitumen Tape

Maflowrap – Fabric Backed Bitumen Tape

Maflowrap – Fabric Backed Bitumen Tape

Maflowrap FBT is a high-performance, cold-applied waterproof tape manufactured with a nonwoven synthetic fabric backing and a layer of rubber-modified bitumen adhesive.

Maflowrap FBT is part of a protection system developed for steel tank bases and has been specially developed to wrap directly onto Chase’s Longwrap Petrolatum Tapes.

The fabric backing provides a surface that will accept industrial paints to match existing structures and resist bitumen bleed through. The fabric extends slightly beyond the adhesive on both edges to eliminate adhesive visibility at the overlap. It also offers good conformability for site applications to contoured or complex substrates.

Image Waterproofing coating on top of FBT for finishing

  • Bonds well even at low temperatures
  • Has a wide service temperature range between  5ºC and 80ºC
  • Acts as an outer layer for petrolatum tape, offering mechanical and UV protection
  • Is compatible with industrial paints and topcoats for coloring and weather protection
  • Contains no VOC
  • Has 2mm clean edge on both sides, preventing outflow of bitumen during application

Follow the application guide as suggested.

 

Connect with us:

Blog | LinkedIn | Twitter | YouTube

  • Storage tank base
  • Oil and gas depot
  • Above-grade piping
  • Flanges
  • Valves
  • Lamppost

SPECIFICATION & SIZES

 

Property Value
thickness 1.2 mm
adhesion to primed steel 2.5 N/mm
adhesion to self 1.0 N/mm
tensile strength 5N/mm
service temperature range -20ºC to +70ºC

 

Size Quantity Weight
55mm x 15m 12 28 lbs
105mm x 15m 8 35 lbs
155 mm x 15m 4 27 lbs
230 mm x 15m 4 40 lbs

 

PACKAGING INFORMATION

(W)MM (L)M Roll per CTN CTNS per Pallet Re per PLT
50 15 12 18  216
100 15 8 18 144
150 15 4 24 96
225 15 4 18 72
Where can I buy Maflowrap FBT?

 You can purchase through Chase Corp Authorized Distributors. For more information contact us: CPCSales@ChaseCorp.com

What sizes can I buy Maflowrap FBT in?

Maflowrap FBT comes in these sizes: 50mm, 100mm, 150mm and 225mm x 15m rolls.

Will I need a primer?

There is no need for a primer to be used in the application of Maflowrap FBT

Do I need any special tools?

No, you don’t need any special tools, you can apply Maflowrap FBT by hand

How many rolls would I get in a box/carton?

 This would depend on what size you need, you can find this information on the Technical Data Sheet.

Do we need to be trained to apply Maflowrap FBT?

No, Maflowrap FBT can easily be applied by following Chase’s application guidelines.

Do you have reference applications?

 yes, we have case studies within Europe that we can send you. You can request them via CPCSales@ChaseCorp.com

Is Maflowrap FBT UV stable?

 Yes, Maflowrap  FBT is UV resistant for aboveground applications; however, protection is further enhanced by using a suitable epoxy overcoating.

Can Maflowrap FBT be applied to complex pipes, valves, joints etc?

Yes, Maflowrap FBT is designed to conform to complex joints, risers, posts, tank bases, and other intricate shapes.

Can Longseal FBT protect assets in tank base environments?

Yes, Maflowrap FBT is designed to be part of a protective system that not only protects assets but also enhances the environment by allowing a suitable epoxy topcoat to be applied.

Advantages & Benefits
  • Bonds well even at low temperatures
  • Has a wide service temperature range between  5ºC and 80ºC
  • Acts as an outer layer for petrolatum tape, offering mechanical and UV protection
  • Is compatible with industrial paints and topcoats for coloring and weather protection
  • Contains no VOC
  • Has 2mm clean edge on both sides, preventing outflow of bitumen during application
How to Use It

Follow the application guide as suggested.

 

Connect with us:

Blog | LinkedIn | Twitter | YouTube

Where to Use It
  • Storage tank base
  • Oil and gas depot
  • Above-grade piping
  • Flanges
  • Valves
  • Lamppost
Specification & Sizes

SPECIFICATION & SIZES

 

Property Value
thickness 1.2 mm
adhesion to primed steel 2.5 N/mm
adhesion to self 1.0 N/mm
tensile strength 5N/mm
service temperature range -20ºC to +70ºC

 

Size Quantity Weight
55mm x 15m 12 28 lbs
105mm x 15m 8 35 lbs
155 mm x 15m 4 27 lbs
230 mm x 15m 4 40 lbs

 

PACKAGING INFORMATION

(W)MM (L)M Roll per CTN CTNS per Pallet Re per PLT
50 15 12 18  216
100 15 8 18 144
150 15 4 24 96
225 15 4 18 72
Frequently Asked Question
Where can I buy Maflowrap FBT?

 You can purchase through Chase Corp Authorized Distributors. For more information contact us: CPCSales@ChaseCorp.com

What sizes can I buy Maflowrap FBT in?

Maflowrap FBT comes in these sizes: 50mm, 100mm, 150mm and 225mm x 15m rolls.

Will I need a primer?

There is no need for a primer to be used in the application of Maflowrap FBT

Do I need any special tools?

No, you don’t need any special tools, you can apply Maflowrap FBT by hand

How many rolls would I get in a box/carton?

 This would depend on what size you need, you can find this information on the Technical Data Sheet.

Do we need to be trained to apply Maflowrap FBT?

No, Maflowrap FBT can easily be applied by following Chase’s application guidelines.

Do you have reference applications?

 yes, we have case studies within Europe that we can send you. You can request them via CPCSales@ChaseCorp.com

Is Maflowrap FBT UV stable?

 Yes, Maflowrap  FBT is UV resistant for aboveground applications; however, protection is further enhanced by using a suitable epoxy overcoating.

Can Maflowrap FBT be applied to complex pipes, valves, joints etc?

Yes, Maflowrap FBT is designed to conform to complex joints, risers, posts, tank bases, and other intricate shapes.

Can Longseal FBT protect assets in tank base environments?

Yes, Maflowrap FBT is designed to be part of a protective system that not only protects assets but also enhances the environment by allowing a suitable epoxy topcoat to be applied.

Application Details

Need more information? 

Contact Us