Primers
Omniprime
Omniprime is a single component universal primer which can be used with Tapecoat cold or hot applied tapes.
- Low VOC and meets the most stringent VOC regulations
- Required primer for TC20, 6025, HT/MB for applications up to 180F
- Required primer for Tapecoat Elastomeric Tapes below 40F
- Optional primer for Tapecoat Elastomeric tapes above 40F
Primer B400
Maflowrap Primer B400 is:
- designed to be used with Serviwrap bitumen tapes, except for M30 and Outerwrap
- Primer AB is a quick-drying liquid adhesive that creates a permanent bond between the tape and substrate and is applied using a brush, roller or spray equipment
Roybond 747
Roybond 747 is a single component primer for Greenline and Handy Cap:
- Required primer for Greenline and Handy Caps
- Available in liquid and aerosol packaging
Paste Primer
Longwrap Paste Primer is:
- Soft blend of petrolatum and inert fillers
- Longwrap Paste Primer has been developed for use as a primer to condition the surface prior to application of Longwrap Petrolatum Tape
Serviwrap Primer AB
Serviwrap Primer AB:
- Designed to be used with Serviwrap bitumen tapes, except for M30 and Outerwrap
- Primer AB is a quick-drying liquid adhesive that creates a permanent bond between the tape and substrate and is applied using a brush, roller or spray equipment
TC 7000 Epoxy
Tapecoat TC 7000 Epoxy is a two-part high-temperature epoxy.
- 100% solids/ No VOC
- Maximum service temperature 300°F (149°C)
- Can be used as a standalone pipeline coating or as a primer for Tapecoat High-Temperature Tapes
- UV stable for above ground applications with the minor color change due to oxidation
- Can be backfilled in 2-3 hours at 70F and 50% relative humidity
- Meets NACE RP0105 and ANSI/AWWA C210