Memberships & Certifications
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B12 is particularly well suited for impregnating coil, for coating ferrite cores and can be soldered through easily or chemically removed. HumiSeal® 1B12 coating is RoHS Directive 2002/95/EC compliant.
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B12 is particularly well suited for impregnating coil, for coating ferrite cores and can be soldered through easily or chemically removed. HumiSeal® 1B12 coating is RoHS Directive 2002/95/EC compliant.
Have a Question and Need to Speak to an Expert?
Our experts are ready to answer your questions!
Contact Us
| Chemistry | Acrylic |
|---|---|
| Curing Conditions | Air, Heat |
| Material | 24 hrs @ RT or 30 min @ 76°C |
| Volatile Organic Compounds | 714 g/l |
| Cure Time | 24 hrs @ RT or 30 min @ 76°C |
| Recommended Thickness | 25-75 microns |
HUM 1B12 Technical Data Sheet
PDFDownloadHumiSeal RoHS Certificate Acrylic Conformal Coatings
PDFDownloadHumiSeal REACH Statement
PDFDownload
HumiSeal® 1A20R is a single component, chemically resistant, fast curing polyurethane conformal coating. HumiSeal® 1A20R fluoresces under UV light for ease of inspection.
HumiSeal® 1C49LV is a moisture curing, low viscosity, VOC-free silicone conformal coating which provides excellent moisture and environmental protection for printed circuit assemblies.
HumiSeal® 1C49 is a moisture curing, high build, VOC-free silicone conformal coating which provides excellent moisture and environmental protection for printed circuit assemblies.
HumiSeal® 1B51 is a fast drying, single component, synthetic rubber conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies.
HumiSeal® 1C51 is a single component, VOC-free, fast thermal curing silicone conformal coating.
