Memberships & Certifications
A two-part, 100% solids, Zero VOC, below grade, fast curing epoxy with a maximum service temperature is 300°F (149°C), and can be backfilled in 2-3 hours at 70°F and 50% relative humidity. It is a standalone coating that can be applied at 30 mils and can be backfilled in 2-3 hours at 70°F and 50% relative humidity. TC Reinforcing Scrim can be used to increase abrasion and impact resistance. .
A two-part, 100% solids, Zero VOC, below grade, fast curing epoxy with a maximum service temperature is 300°F (149°C), and can be backfilled in 2-3 hours at 70°F and 50% relative humidity. It is a standalone coating that can be applied at 30 mils and can be backfilled in 2-3 hours at 70°F and 50% relative humidity. TC Reinforcing Scrim can be used to increase abrasion and impact resistance. Meets NACE RP0105 and ASNI/AWWA C210.
Have a Question and Need to Speak to an Expert?
Our experts are ready to answer your questions!
Contact Us
A two component, 100% solids, high-temperature epoxy with a maximum service temperature of 300°F (149°C). It can be used as a standalone pipeline coating or as a primer for Tapecoat High-Temperature Tapes.
A a two-part, 100% solids, moisture tolerant, Zero VOC epoxy that can be applied to dry and damp surfaces. It has a maximum service temperature of 165°F (74C°).
A low viscosity, transparent, two-part epoxy system designed to be used as a room temperature curing adhesive and encapsulant for small to medium sized electronic packages.
This two-part, green epoxy adhesive cures at room temperature for non-sag structural bonding. It offers low shrinkage, strong shock resistance, reliable mechanical and electrical properties, and performs well on damp surfaces.
