HumiSeal® 1C55 is a single component, VOC-free, low viscosity, fast thermal curing silicone conformal coating. The reduced viscosity and long pot life of HumiSeal® 1C55 make it ideal for dipping and spraying. HumiSeal® 1C55 demonstrates excellent flexibility, contains an optical brightener for inspection under black light and is repairable. HumiSeal® 1C55 coating is RoHS Directive 2011/65/EU compliant.
HumiSeal® 1C55 is a single component, VOC-free, low viscosity, fast thermal curing silicone conformal coating. The reduced viscosity and long pot life of HumiSeal® 1C55 make it ideal for dipping and spraying. HumiSeal® 1C55 demonstrates excellent flexibility, contains an optical brightener for inspection under black light and is repairable. HumiSeal® 1C55 coating is RoHS Directive 2011/65/EU compliant.
Have a Question and Need to Speak to an Expert?
Our experts are ready to answer your questions!
Contact Us| Chemistry | Silicone |
|---|---|
| Curing Conditions | Heat |
| Material | 10 - 15 min @ 105 - 130ºC |
| Volatile Organic Compounds | 0 g/l |
| Cure Time | 10 - 15 min @ 105 - 130ºC |
| Recommended Thickness | 50 - 200 microns |
HUM 1C55 Technical Data Sheet
PDFDownloadHumiSeal RoHS Certificate Acrylic Conformal Coatings
PDFDownloadHumiSeal REACH Statement
PDFDownload
HumiSeal® 1B51NS is a fast drying, single component, synthetic rubber conformal coating that contains methylcyclohexane solvent that is more environmentally friendly than traditional solvents.

HumiSeal® 1A33 Gel is a single component thixotropic polyurethane paste, suitable for general printed circuit board applications.

HumiSeal® 2E11 is a room temperature curing two-part epoxy system designed for electronic sealing, encapsulating and potting applications.


HumiSeal® 1C51 is a single component, VOC-free, fast thermal curing silicone conformal coating.

HumiSeal® 1B51LU is a fast drying, single component, synthetic rubber conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies.