Memberships & Certifications
A soft, one part, UV curable masking material. It applies easily because of its shearing thinning viscosity profile and is 100% cured by exposure to UV to provide a temporary barrier to prevent ingress of coatings into keep out areas. Has excellent solvent resistance that provides selective release from conformal coating, and will survive intermittent exposure to temperatures up to 150°C. This product is REACH and RoHS compliant. Available in bulk and syringes.
A single component, high solids, UV curable, acrylated polyurethane conformal coating that possesses excellent chemical resistance, surface hardness, flexibility and moisture resistance. Have a secondary cure mechanism that will fully cure any unexposed areas of the coating within 2-3 days.
Have a Question and Need to Speak to an Expert?
Our experts are ready to answer your questions!
Contact Us
| Chemistry | Urethane Acrylate |
|---|---|
| Specific Gravity | 1.04 |
| Recommended Thickness | </= 5mm |
| Curing Conditions | UV Curing |
| Shipping Weight (lbs) | 0.5 |
| Packaging | EACH |
HumiSeal UV92 Technical Data Sheet
PDFDownload
A soft, one part, UV curable masking material. It applies easily because of its shearing thinning viscosity profile and is 100% cured by exposure to UV to provide a temporary barrier to prevent ingress of coatings into keep out areas.
A single component, high solids, UV curable, acrylated polyurethane conformal coating that possesses excellent chemical resistance, surface hardness, flexibility and moisture resistance.
HumiSeal® 1B59 SEC is an air drying, single component, synthetic rubber conformal coating.
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
HumiSeal® Stripper 1100 is a unique stripper to remove dual cure acrylated urethane conformal coating such as UV40 family products.