Memberships & Certifications
HumiSeal® 1B51 is a fast drying, single component, synthetic rubber conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. Because of its unique base polymer, HumiSeal® 1B51 has extremely low moisture vapour permeability. The coating demonstrates excellent flexibility, low stress on components and is easily repaired. HumiSeal® 1B51 is in full compliance with the RoHS Directive EU 2015/863.
HumiSeal® 1B51 is a fast drying, single component, synthetic rubber conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. Because of its unique base polymer, HumiSeal® 1B51 has extremely low moisture vapour permeability. The coating demonstrates excellent flexibility, low stress on components and is easily repaired. HumiSeal® 1B51 is in full compliance with the RoHS Directive EU 2015/863.
Have a Question and Need to Speak to an Expert?
Our experts are ready to answer your questions!
Contact Us
| Chemistry | Synthetic Rubber |
|---|---|
| Curing Conditions | Air, Heat |
| Material | 24 hrs @ RT or 30 min @ 76°C |
| Volatile Organic Compounds | 694 g/l |
| Cure Time | 24 hrs @ RT or 30 min @ 76°C |
| Recommended Thickness | 25-75 microns |
HUM 1B51 Technical Data Sheet
PDFDownloadHumiSeal RoHS Certificate Acrylic Conformal Coatings
PDFDownloadHumiSeal REACH Statement
PDFDownload
HumiSeal® 1B51NS is a fast drying, single component, synthetic rubber conformal coating that contains methylcyclohexane solvent that is more environmentally friendly than traditional solvents.
HumiSeal® 1B51LU is a fast drying, single component, synthetic rubber conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies.
HumiSeal® 1C63 is a UV/RTV curing, oxime-type cure silicone conformal coating which provides excellent moisture and environmental protection for printed circuit assemblies.
HumiSeal® 1C49 is a moisture curing, high build, VOC-free silicone conformal coating which provides excellent moisture and environmental protection for printed circuit assemblies.
HumiSeal® 1B15 is a single component, fast drying, easily repaired, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B15 coating is RoHS Directive 2002/95/EC compliant.
