Memberships & Certifications
HumiSeal® 1B59 LTX Pre-blends are air drying, single component, synthetic rubber conformal coatings. HumiSeal® 1B59 LTX Pre-blends are formulated for effective application using film coater application methods, although other methods can also be used.
HumiSeal® 1B59 LTX Pre-blends are air drying, single component, synthetic rubber conformal coatings. HumiSeal® 1B59 LTX Pre-blends are formulated for effective application using film coater application methods, although other methods can also be used. HumiSeal® 1B59 LTX Pre-blends demonstrate the following advantages: - Extremely low moisture vapor permeability. - Protection against moisture, salt / corrosive environments, and dirt - Improved thermal stability compared with other conformal coatings. - Excellent flexibility putting low stress on components - Fluoresces under UV for ease of inspection and is easily repaired. - Compliant to China Standard GB30981-2020
Have a Question and Need to Speak to an Expert?
Our experts are ready to answer your questions!
Contact Us
HumiSeal® 1B59 SEC is an air drying, single component, synthetic rubber conformal coating.
A soft, one part, UV curable masking material. It applies easily because of its shearing thinning viscosity profile and is 100% cured by exposure to UV to provide a temporary barrier to prevent ingress of coatings into keep out areas.
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
HumiSeal® Stripper 1080 Series Products are a range of strippers designed to dissolve cured HumiSeal® acrylic coatings without negatively affecting printed wiring board substrates or components.