Memberships & Certifications
HumiSeal® 2C51 is a two-component high strength, fast curing silicone encapsulating gel supplied as Parts A and B, suitable for general printed circuit board applications. HumiSeal® 2C51 is characterized by room temperature cure and low viscosity for ease of application and contains UV tracer for ease of inspection. The two components of HumiSeal 2C51 are blue and yellow and turn green when mixed. HumiSeal® 2C51 is RoHS Directive EU 2015/863 compliant.
HumiSeal® 2C51 is a two-component high strength, fast curing silicone encapsulating gel supplied as Parts A and B, suitable for general printed circuit board applications. HumiSeal® 2C51 is characterized by room temperature cure and low viscosity for ease of application and contains UV tracer for ease of inspection. The two components of HumiSeal 2C51 are blue and yellow and turn green when mixed. HumiSeal® 2C51 is RoHS Directive EU 2015/863 compliant.
Have a Question and Need to Speak to an Expert?
Our experts are ready to answer your questions!
Contact Us
| Chemistry | Silicone |
|---|---|
| Curing Conditions | Air, Heat |
| Material | 30 minutes @ 70°C or 60 min @ RT |
| Cure Time | 30 minutes @ 70°C or 60 min @ RT |
| Volatile Organic Compounds | 0 g/l |
HUM 2C51 Technical Data Sheet
PDFDownloadHumiSeal RoHS Certificate Acrylic Conformal Coatings
PDFDownloadHumiSeal REACH Statement
PDFDownload
HumiSeal® 1A68 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications.
HumiSeal® 1A27LU is a single component, polyurethane conformal coating, suitable for general printed circuit board applications.
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies.
HumiSeal® 1B15 is a single component, fast drying, easily repaired, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B15 coating is RoHS Directive 2002/95/EC compliant.
HumiSeal® 1A20R is a single component, chemically resistant, fast curing polyurethane conformal coating. HumiSeal® 1A20R fluoresces under UV light for ease of inspection.
