Memberships & Certifications
HumiSeal® 2E11 is a room temperature curing two-part epoxy system designed for electronic sealing, encapsulating and potting applications. This product has been formulated with an easy 1:2 volume mix-ratio. HumiSeal 2E11 provides superior adhesion to a wide variety of substrates including most metals and plastics.
HumiSeal® 2E11 is a room temperature curing two-part epoxy system designed for electronic sealing, encapsulating and potting applications. This product has been formulated with an easy 1:2 volume mix-ratio. HumiSeal 2E11 provides superior adhesion to a wide variety of substrates including most metals and plastics.
Have a Question and Need to Speak to an Expert?
Our experts are ready to answer your questions!
Contact Us
| Chemistry | Epoxy |
|---|---|
| Curing Conditions | Air |
| Material | 24 hours @ room temp |
| Cure Time | 24 hours @ room temp |
| Recommended Thickness | 25-75 microns |
| Specific Gravity | Part A:1.16 /Part B: 1.00 |
HUM 2E11 Technical Data Sheet
PDFDownload
HumiSeal® 1A68 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications.
HumiSeal® 1A27LU is a single component, polyurethane conformal coating, suitable for general printed circuit board applications.
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies.
OverviewHumiSeal® 1C51 is a high-performance, VOC-free silicone conformal coating that cures quickly with thermal application. Its low viscosity and extended pot life facilitate easy application......
