HumiSeal® 2A53 is a two component epoxy conformal coating supplied as Parts A and B, suitable for general printed circuit boards and applications where exceptional resistance to solvents or other chemicals is required. HumiSeal® 2A53 fluoresces under UV light for inspection purposes. HumiSeal® 2A53 coating is MIL-I-46058C qualified and IPC-CC-830 and RoHS Directive 2002/95/EC compliant.
Overview
HumiSeal® 2A53 is a two component epoxy conformal coating supplied as Parts A and B, suitable for general printed circuit boards and applications where exceptional resistance to solvents or other chemicals is required. HumiSeal® 2A53 fluoresces under UV light for inspection purposes. HumiSeal® 2A53 coating is MIL-I-46058C qualified and IPC-CC-830 and RoHS Directive 2002/95/EC compliant.
Overview
Specifications
| Chemistry | Epoxy |
|---|---|
| Curing Conditions | Heat |
| Material | 2 hrs @ 93°C |
| Volatile Organic Compounds | 25-75 microns |
| Cure Time | 2 hrs @ 93°C |
Related products
HumiSeal® Stripper 1072 dissolves cured HumiSeal® urethane coatings or HumiSeal® water-based acrylic coatings, without negatively affecting printed wiring board substrates or components.
HumiSeal® Stripper 1100 is a unique stripper to remove dual cure acrylated urethane conformal coating such as UV40 family products.
HumiSeal® 1B59LU is an air drying, single component, synthetic rubber conformal coating.
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
HumiSeal® 1A68 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications.
