344 results found for: ���� Order Ivermectin ���� www.Ivermectin-Stromectol.com ���� How Long Before Ivermectin Works ���� Is Ivermectin Safe For Humans , Ivermectin Cattle Injectable

Gasketing Materials

Gasketing Materials Shielding and Conductive Gaskets Long-term, reliable protection of sensitive circuits and components is important in today’s delicate and demanding electronics applications. Resin Designs shielding gaskets and Resin Designs…

Markets Products

…resin systems that can bond, form composites, seal and isolate over a wide range of substrates. Reliable, high-performance and cost-effective, these systems are engineered to deliver strength, durability, lightness and…

Medical Device Adhesives

Adhesives for Medical Devices: Biocompatible & FDA Compliant When assessing biocompatibility, our Axis product line is fully tested and compliant with the global medical device standard ISO 10993. You can…

Axis M 120 for Medical Device Adhesive

…is stable over a wide temperature range. Features: RoHS & REACH Compliant Impact and peel resistant Thermal shock resistant Moisture resistant Room temperature cure Long work life Applications: Medical Potting…

Epoxy Encapsulants

Epoxy Encapsulants Encapsulating liquids are used to protect devices from extreme operating conditions, mechanical stresses, and electrical shock. Resin Designs potting compounds are formulated from epoxy, urethane or acrylated urethanes….

EMI Conductive Gaskets

…cloth precut to fit all common antenna sizes, supplied with protective release film Physical form Woven aluminum alloy wire cloth impregnated with a high-performance, nonhazardous crosslinked fluorosilicone gel sealant Special…

Thermal Gap Pad TP-2101

Thermal Gap Pad TP-2101 Resin Designs TP-2101 Thermal Gap Pad is a cost-competitive, highly compressible, silicone gap filler with moderate bulk conductivity. This filler uses foam reinforcement to maintain compressibility,…

Thermal Gap Pad TP-2160

Thermal Gap Pad TP-2160 Resin Designs TP-2160 Thermal Gap Pad is a cost-competitive, highly compressible, silicone gap filler with moderate bulk conductivity delivered with a highly conductive non-tacky surface on…

Structural Adhesives

…goods component assembly Pool, marine, and recreational device adhesion Wood, metals, glass and plastics bonding Products: 2 component epoxies 2 component polyurethanes UV curable epoxies UV curable acrylated urethanes arrows…

Contact Paper Tyger

    Contact Us Contact us: Useful Links Technical Library Free Sample Blog Need to Talk? Headquarters: Chase Corporation 295 University Avenue Westwood MA, 02090 USA Tel: 001-781-332-0700 Email: papertyger@chasecorp.com

HumiSeal® Attending Productronica India with a Range of Conformal Coatings For All Market Sectors

HumiSeal®, a leading manufacturer and distributor of conformal coatings has announced that it will use the Productronica India 2016 event in Bangalore, 21st – 23rd September 2016, as a platform…

1B73

…per MIL-I-46058C >1500 volts Dielectric Breakdown Voltage, per ASTM D149 6300 volts Dielectric Constant, at 1MHz and 25°C, per ASTM D150-98 2.6 Dissipation Factor, at 1MHz and 25°C, per ASTM…

1B31

…coating and their particular assembly materials, process conditions and cleanliness level. Please contact a HumiSeal representative for additional information. Dipping Depending on the complexity, density and configuration of components on…

1B51

…Depending on the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal® 1B51 with HumiSeal® Thinner 535 in order to…

UV20Gel

…Material Cured Properties* Property Value Hardness, Shore A (Initial) 10 Hardness, Shore A (10 days post cure) 60 Tensile Strength, MPa [psi] 4.8 [700] Elongation, % >400 Moisture Resistance Excellent…

Chase Corporation Acquires Specialty Chemical Product Lines

…volatile organic compounds (VOC). The ChemQuest Group, Cincinnati, OH, a leading specialty chemicals consulting firm, advised Chase on this acquisition and provided critical guidance, analysis and insight into the strategic…

Chase Corporation Acquires Resin Designs, LLC

…of 1995 provides a “safe harbor” for such forward-looking statements. In order to comply with the terms of the safe harbor, the Company cautions investors that any forward-looking statements made…

1A20R

…coating. Surfaces must be free of moisture, dirt, wax, grease, and all other contaminants. Otherwise, ionic or organic residues on the substrate could be trapped under the coating and cause…

What are Conformal Coatings? All your frequently asked questions answered

…polyurethanes, while easy-to-apply and enjoy long pot life, sometimes require long curing regiments to achieve a full or optimum cure. In some instances, the cure cycle can be accelerated with…

HumiSeal works with distributor in Italy on conformal coating training seminars

HumiSeal®, the leading conformal coatings solutions provider for the protection of printed circuit boards and electronic assemblies, is delighted with the success of the recent conformal coating workshops held in…

2A64

…settle for 30 minutes prior to use so that any air bubbles formed during blending can escape. Dipping Depending on the complexity, density and configuration of components on the assembly,…

1B12

…Specification Density, per ASTM D1475 0.89 ± 0.02 g/cm3 Solids Content, % by weight per Fed-Std-141, Meth. 4044 21.5 ± 1.5 % Viscosity, per Fed-Std-141, Meth. 4287 30 ± 5…

1A27 LTX

…the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal® 1A27 LTX with HumiSeal® Thinner 789 in order to obtain…

1A33

…Dipping Depending on the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal 1A33 with HumiSeal Thinner 503 in order

1A33LTX Pre-blended Products

…Depending on the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal 1A33 with HumiSeal Thinner 503 in order to…

UV40 LED UV Curable Conformal Coating

…@ 80ºC Flammability, per UL-94 Pending Shore Hardness, Shore D 35 GB30981-2020 Compliant Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts Insulation Resistance, per MIL-I-46058C 5.0 x 1014 ohms (500TΩ) Moisture…

1A27

…Uniformity of the film depends on the component density and operator technique. Product Specification Density, per ASTM D1475 0.96 ± 0.02 g/cm³ Solids Content, % by weight per Fed-Std-141, Meth….

1B18

…Withstand Voltage, per MIL-I-46058C >1500 volts Dielectric Breakdown Voltage, per ASTM D149 6300 volts Dielectric Constant, at 1MHz and 25°C, per ASTM D150-98 2.6 Dissipation Factor, at 1MHz and 25°C,…

1A34

…to Reach Optimum Properties 7 days Thinner, if needed (dipping, brushing, spraying) HumiSeal® Thinner 521, 521EU Recommended Stripper HumiSeal® Stripper 1072 Shelf Life at Room Temperature, DOM 6 months Thermal…

1A20

…to Reach Optimum Properties 7 days Thinner, if needed (dipping, brushing, spraying) HumiSeal® Thinner 521, 521EU Recommended Stripper HumiSeal® Stripper 1072 Shelf Life at Room Temperature, DOM 6 months Thermal…

1R32A-2

…Thinner 503, 505 Recommended Thinner (spraying) HumiSeal Thinner 521, 521EU, 600 Recommended Stripper HumiSeal Stripper 1080, 1080EU Shelf Life at Room Temperature, DOM 24 months Thermal Shock, 50 cycles per…

1C63

…A, per ASTM D2240 15 Flammability, per UL94 V-1 Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts Insulation Resistance, per MIL-I-46058C 1.1 x 1012 ohms (1.1TΩ) Moisture Insulation Resistance, per MIL-I-46058C…

1B73 LOC

complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal® 1B73LOC with HumiSeal® Thinner 701 in order to obtain a uniform…

1B73 EPA

…per ASTM D149 6300 volts Dielectric Constant, at 1MHz and 25°C, per ASTM D150-98 2.6 Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.01 Insulation Resistance, per MIL-I-46058C 5.5…

1B51 NSLU

…density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal® 1B51 NSLU with HumiSeal® Thinner 903, 905, 521EU in order to obtain…

1B15

complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal 1B15 with HumiSeal Thinner 503 in order to obtain a uniform…

1B66

for additional information. Dipping Depending on the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal 1B66 with HumiSeal Thinner…

UV50LV

…E105698 IPC-CC-830 and RoHS Directive 2011/65/EU compliant Typical Properties of HumiSeal® UV50LV Density 1.0 to 1.1 g/cm3 Minimum Solids Content 95% Viscosity, per Fed-Std-141, Meth. 4287 80 – 120 centipoise…

1R32

…information. Dipping Depending on the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal 1R32 with HumiSeal Thinner 505 in…

1B31 EPA

…60°C Flammability, per MIL-I-46058C Self-Extinguishing Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts Dielectric Breakdown Voltage, per ASTM D149 6300 volts Dielectric Constant, at 1MHz and 25°C, per ASTM D150-98 2.6…

HumiSeal® UV500-2 UV Curable Conformal Coating

…be taken to protect process vessels and partial containers from moisture. Partial containers must be purged with a dry, inert gas such as dry air, nitrogen, or argon before closure,…

1B31 LOC

compatibility between the conformal coating and their particular assembly materials, process conditions and cleanliness level. Please contact a HumiSeal representative for additional information. Dipping Depending on the complexity, density and…

UV500

…coating Be applied by all selective coating Have excellent chemical and moisture HumiSeal® UV500 meets the following standards: IEC 60664-3 Compliant to REACH, RoHS Directive EU 2015/863 Compliant with China…

1A68

…Dipping Depending on the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal® 1A68 with HumiSeal® Thinner 503 in order

1B59LU

…information. Dipping Depending on the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal® 1B591 LU with HumiSeal® Thinner 903,…

HumiSeal Enjoys a Successful SMT Nuremberg 2016 With Interest in Several Key Product Ranges

how far conformal coatings have come as HumiSeal continues to set the benchmark. Commenting on the exhibition Chris Palin, EMEIA Manager for HumiSeal, said: “We have been exhibiting at SMT…

1122

…and Safety regulations. Properties Density, per ASTM D1475 1.05 ± 0.02 g/cm³ Solids Content, % by weight per Fed-Std-141, Meth. 4044 33 ± 2 % Viscosity, per Fed-Std-141, Meth. 4287…

1A33NS

…Uniformity of the film depends on the component density and operator technique. Product Specification Density, per ASTM D1475 0.95 ± 0.02 g/cm3 Solids Content, % by weight per Fed-Std-141, Meth….

1B31S

…weight per Fed-Std-141, Meth. 4044 35 ± 3 % Viscosity, per Fed-Std-141, Meth. 4287 200 ± 15 centipoise VOC 592 grams/liter Drying Time to Handle per Fed-Std-141, Meth. 4061 10…

1B58LU

…hours), 18.6 MPa (after 2,000 hours), 11.6 MPa (after 3,000 hours) Extension, treated at 140°C 503 %, 484 % (after 1,000 hours), 443 % (after 2,000 hours), 96 % (after…

Contact Us