…with specific gravity of 0.77 and is sandable. Request Data Sheets | Free Sample Chemistry Epoxy Viscosity Part A (CPs) 60,000 Viscosity Part B (CPs) 50,000 Mix Ratio 2:1 Pot…
Silicone 1C51 HumiSeal® 1C51 conformal coating is: silicone based fluoresces under UV light thermal cure single component high solids HumiSeal 1C51 conformal coating has: No VOCs or solvent low toxicity…
Epoxy Adhesive 1E21 One part, UV/cationic cure epoxy adhesive. Capable of high temperature performance with good chemical and moisture resistance. Request Data Sheets | Free Sample Chemistry Epoxy Viscosity Part…
…for additional information. Dipping Depending on the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal 1B66 with HumiSeal Thinner…
…gasses, water, petroleum products, and acids. FDA compliant. Request Data Sheets | Free Sample Chemistry Epoxy Viscosity Part A (CPs) 12,000 Viscosity Part B (CPs) 14,000 Mix Ratio 2:1 to…
…compliant with the RoHS directive 2015/863/EU provides excellent moisture and environmental protection can be used to seal, dam and provide an extra level of protection around component leads An acrylic…
Silicone 1C49LVF HumiSeal® 1C49LVF conformal coating is: silicone based very fast curing fluoresces under UV light room temperature, moisture cure single component high solids HumiSeal 1C49LVF conformal coating has: No…
Urethane 1A20R HumiSeal® 1A20R conformal coating is: Urethane chemistry fast curing, chemically resistant single component used in combination with Thinner 521 recognized under UL File Number E105698. HumiSeal 1A20R conformal…
Acrylics 1B73 HumiSeal® 1B73 conformal coating is: an acrylic chemistry fast drying single component recognized under UL File Number E105698 used in combination with Thinner 73 or 730EU HumiSeal 1B73…
…conformal coating and their particular assembly materials, process conditions and cleanliness level. Please contact HumiSeal® for additional information. Dipping Depending on the complexity, density and configuration of components on the…
1B73 LOC HumiSeal® 1B73LOC conformal coating: low VOC solvent based conformal coating that complies with most North American air quality regulations. a fast drying, single component, acrylic coating intended for…
…information. Dipping Depending on the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal 1R32 with HumiSeal Thinner 505 in…
Urethane 1A20 HumiSeal® 1A20 conformal coating is: Urethane chemistry fast curing, chemically resistant single component used in combination with Thinner 521 RoHS Directive 2002/95/EC compliant recognized under UL File Number…
Urethane 1A33GEL HumiSeal® 1A33 Gel conformal coating is: a thixotropic urethane gel fast drying single component HumiSeal 1A33 Gel conformal coating has: excellent moisture and environmental protection for printed circuit…
Urethane 1A34 HumiSeal® 1A34 conformal coating is: Urethane chemistry chemically resistant single component used in combination with Thinner 521/521 EU RoHS directive 2015/863/EU HumiSeal 1A34 conformal coating has: excellent moisture…
…pattern resulting in a pinhole-free film. The amount of thinner and spray pressure will depend on the specific type of spray equipment and operator technique. The recommended ratio of HumiSeal…
Synthetic Rubber 1B51 HumiSeal® 1B51 conformal coating is: a fast drying single component synthetic rubber used in combination with Thinner 535/521/521 EU HumiSeal 1B51 conformal coating has: excellent moisture and…
…lead-free solder products in increasingly smaller and more complex product builds. Today’s mobile phones are getting smaller and more compact whilst simultaneously offering increased functionality and technology. The introduction of…
…W: www.humiseal.com USA &Asian Enquiries T: +1781-332-0772 E: sales@chasecorp.com W: www.humiseal.com For Media enquiries please contact: Tim Rose– EDGE Design T: +44 (0) 7502 333093 E: [email protected].com W: www.edgecreative.uk.com…
…environmentally safe, non-ODP propellant. The coating may be removed chemically using HumiSeal® Stripper 1063. HumiSeal® 1A27 Aerosol is IPC-CC-830 and RoHS Directive 2002/95/EC compliant, and recognized under UL File Number…
…reality is that many commercial components are supplied with a pure tin finish (Lead-free compliant) to preserve solderability. There has recently been much concern about the potential for tin whisker…
…to the Company. Eric Conley will be named as the Company’s new Chief Executive Officer and a member of the Board of Directors, effective immediately. “On behalf of the Chase…
Contact Us Need a 4EvaSeal® rep to contact you or answer a question? T: 603-367-3867 E: CIMadmin@chasecorp.com…
…more information on CIM materials please visit www.cimind.com. Q: Will 4EvaSeal® tape work under water? 4EvaSeal® should not be applied to wet surfaces or under water. 4EvaSeal® can be installed…
…Massachusetts, USA Chase operates manufacturing facilities in the United States, Europe, and Asia and invests in capabilities to deliver value to global customers. Visit Chase Corporation www.chasecorp.com Request Information Blogs…
Contact Us Chase Global Operations Center 295 University Ave, Westwood, MA 02090 Tel: +1 781-332-0772 Toll Free (US only): 800-323-4182 Fax: +1 781-332-0702 Contact Us:…
…cycling and high humidity applications SA50 has been specifically developed to meet the demanding needs in applications that commonly use aluminum identification plates such as those used in the aerospace…
…cable connections. The product is designed to be cured to a tack free surface by exposure to ultraviolet (UV) light. Moisture secondary curing mechanism completes the polymer cross linking process….
…Company cautions investors that any forward-looking statements made by the Company are not guarantees of future performance and that a variety of factors could cause the Company´s actual results and…
…of 1995 provides a “safe harbor” for such forward-looking statements. In order to comply with the terms of the safe harbor, the Company cautions investors that any forward-looking statements made…
CIM EMT Primer Description CIM EMT primer is a two-component solvent-free epoxy primer designed for green and damp porous surfaces such as concrete. Features & Benefits Moisture tolerant Improves adhesion…
…Trace-Safe Trench A perfect combination of price and performance Best for an open trench, Nano and micro trench applications Small enough to fit into an occupied duct Lightweight and super…
White Papers GTI Test Report Lighting Report Useful Links Technical Library Test Data Report Free Sample Blog Need to Talk? Let’s connect and never miss an update or news…
…Tracer Wire Live Demo Event Trace-Safe/Neptco Neptco Trace-Safe® Tracer Wire Live Demo Event Trace-Safe/Neptco Neptco Trace-Safe® Tracer Wire Live Demo Event Trace-Safe/Neptco Need more information? Talk to us Free Sample…
…the ideal tracer wire for gas, water and sewer applications. At NEPTCO, we have nearly 60 years of experience engineering materials for commercial, industrial and military applications. We work with…
…splice point need a locate presence or not? Our new universal connectors tackle most splicing requirements with a simple, yet efficient design. Trace-Safe connectors come in two varieties: a base…
…cable connections. The product is designed to be cured to a tack free surface by exposure to ultraviolet (UV) light. Moisture secondary curing mechanism completes the polymer cross linking process….
…cycling and high humidity applications SA50 has been specifically developed to meet the demanding needs in applications that commonly use aluminum identification plates such as those used in the aerospace…
Radiance CF10 RADIANCE CF10 is a single component, cost-effective, UV curing gel specifically developed to meet the demanding needs in applications that commonly involve connectors. Although it was initially created…
…excellent chemical resistance and surface hardness, with a tack-free surface post-UV exposure. Its secondary moisture curing in the unexposed areas will complete within 2-3 days at ambient conditions. The coating…
Contact Us Chase Global Operations Center 295 University Ave, Westwood, MA 02090 Tel: +1 781-332-0772 Toll Free (US only): 800-323-4182 Fax: +1 781-332-0702 Contact Us:…
…100 27 – 102 4 Bond & Writing 39″ 24, 36, & 42” Useful Links Technical Library Free Sample Blog Need to Talk? Let’s connect and never miss an update…
…inkjet and toner devices. The paper surface also has compatibility with multiple inksets and toner devices. Features & Benefits Good print performance Good toner / ink adhesion Good line acuity…
Contact Us Contact us: Useful Links Technical Library Free Sample Blog Need to Talk? Headquarters: Chase Corporation 295 University Avenue Westwood MA, 02090 USA Tel: 001-781-332-0700 Email: papertyger@chasecorp.com…
Petrolatum/Wax Tapes Color Coat Wax Tape Tapecoat Color Coat is a 60 mil wax based tape ideal for coating irregular surfaces: VOC Free with no odor for application in confined…
Electronic & Industrial Coatings Industrial Adhesives, Thermal Management, & Encapsulants Conformal Coatings, Adhesives, & Encapsulants for Electronics Industrial UV Curable Coatings & Encapsulants Chase Electronic Coatings is comprised of: Conformal…
Static Dissipative Cover Tape NEPTCO cover tapes provide reliable adhesive and antistatic properties, including halogen-free substrates essential to delivering components via tape and reel packaging. NEPTCO is one of the…