AXIS 107-168 Medical Device Adhesive

AXIS 107-168  Medical Device Adhesive

AXIS 107-168: One Part, UV Curable Adhesive

Product Description

UV 107-168 is a medium viscosity fast curing urethane acrylate that bonds well to a wide variety of different substrates. It exhibits good surface wetting and adhesion to glass and a wide variety of plastic and metal based substrates. This product can be cured in 4-6 seconds when exposed to medium intensity UV radiation in the 300-400 nm range. This product requires direct UV exposure during cure. Because of the variability of different UV light sources it is suggested that the user test and specify UV intensity and exposure time. Low intensity UV light sources (200 mw/cm^2) may require as much as a 10 second exposure time.


  • Medium viscosity
  • Fast cure
  • Good surface wetting


  • Glass to metal
  • Glass to plastic


Store material in cool, dry location at a temperature between 10°C to 28°C. Keep from freezing. Material is sensitive to UV and visible light. Refer to packaging specific quote for shelf life information. Consult SDS for safe handling recommendations

ISO – 10993

An ISO 10993 test protocol is an integral part of the quality program for Axis 980. Axis 980 has been qualified to Resin Designs, LLC ISO 10993 protocol as a means to assist in the selection of products for use in the medical device industry.

Need more information?
Contact Resin Designs

Resin Designs Medical Devices 2

Contact Us