AXIS 966-M-F: Flexible Thermoplastic Bonding Adhesive
Resin Designs Medical Device Adhesive 966-M-F is designed for rapid bonding of plastics typically used in the manufacture of medical devices. The red color of Resin Designs Vis-Cure products disappears when they are fully cured. Resin Designs Medical Device Adhesives contain no non-reactive solvents and cure upon exposure to UV light. Their ability to cure in seconds enables faster processing, greater output, and lower processing costs. The 966-M-F version flouresces red for in-line inspection under low-intensity “black light” (365nm). This product is in full compliance with the RoHS directives 2002/95/EC and 2003/11EC. Axis 966-M-F has been qualified to the ISO 10993 Protocol as a means to assist in the selection of products for use in the medical device industry.
- Red to clear upon exposure to UV/ visible light cure
- UV/visible light cure
- Fluoresces in black light
- Tub sets
- Metal to plastic
Store material in cool, dry location at a temperature between 10˚C to 28˚C. Keep from freezing. Material is sensitive to UV and visible light. Refer to packaging-specific quote for shelf life information. Consult MSDS for safe handling recommendations.
ISO – 10993
An ISO 10993 test protocol is an integral part of the quality program for Axis 966-M-F. Axis 966-M-F has been qualified to Resin Designs, LLC ISO 10993 protocol as a means to assist in the selection of products for use in the medical device industry.