Memberships & Certifications
A two component, 100% solids, high-temperature epoxy with a maximum service temperature of 300°F (149°C). Designed for use as a standalone pipeline coating or as a primer for Tapecoat High-Temperature Tapes. It can be backfilled in 2-3 hours at 70F and 50% relative humidity.
A two component, 100% solids, high-temperature epoxy with a maximum service temperature of 300°F (149°C). Designed for use as a standalone pipeline coating or as a primer for Tapecoat High-Temperature Tapes. It can be backfilled in 2-3 hours at 70F and 50% relative humidity. Meets NACE RP0105 and ANSI/AWWA C210.
Have a Question and Need to Speak to an Expert?
Our experts are ready to answer your questions!
Contact Us
A two-part, 100% solids, Zero VOC, below grade, fast curing epoxy with a maximum service temperature is 300°F (149°C), and can be backfilled in 2-3 hours at 70°F and 50% relative humidity.
A two-part, 100% solids, Zero VOC, below grade, all-purpose epoxy coating with a maximum service temperature is 165°F (74°C).
A a two-part, 100% solids, moisture tolerant, Zero VOC epoxy that can be applied to dry and damp surfaces. It has a maximum service temperature of 165°F (74C°).
This two-part, green epoxy adhesive cures at room temperature for non-sag structural bonding. It offers low shrinkage, strong shock resistance, reliable mechanical and electrical properties, and performs well on damp surfaces.
A low viscosity, transparent, two-part epoxy system designed to be used as a room temperature curing adhesive and encapsulant for small to medium sized electronic packages.