Memberships & Certifications
HumiSeal® 1C63 is a UV/RTV curing, oxime-type cure silicone conformal coating which provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1C63 is a non-corrosive, single component coating which will cure upon exposure to either a UV light source or atmospheric moisture at ambient or elevated temperatures. The material is tack-free after exposure to UV light. A secondary moisture cure will cure unexposed areas of the coating within 24 hours at ambient temperature, 50% relative humidity. HumiSeal® 1C63 is self-leveling, with excellent weathering resistance. HumiSeal® 1C63 is recognized under UL File Number E105698 and RoHS Directive 2011/65/EC compliant.
HumiSeal® 1C63 is a UV/RTV curing, oxime-type cure silicone conformal coating which provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1C63 is a non-corrosive, single component coating which will cure upon exposure to either a UV light source or atmospheric moisture at ambient or elevated temperatures. The material is tack-free after exposure to UV light. A secondary moisture cure will cure unexposed areas of the coating within 24 hours at ambient temperature, 50% relative humidity. HumiSeal® 1C63 is self-leveling, with excellent weathering resistance. HumiSeal® 1C63 is recognized under UL File Number E105698 and RoHS Directive 2011/65/EC compliant.
Have a Question and Need to Speak to an Expert?
Our experts are ready to answer your questions!
Contact Us
| Chemistry | Silicone |
|---|---|
| Curing Conditions | UV Curing |
| Material | Varies based on equipment |
| Volatile Organic Compounds | < 50 g/l |
| Cure Time | Varies based on equipment |
| Recommended Thickness | ?? |
HUM 1C63 Technical Data Sheet
PDFDownloadHumiSeal RoHS Certificate Acrylic Conformal Coatings
PDFDownloadHumiSeal REACH Statement
PDFDownload
HumiSeal® 1A68 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications.
HumiSeal® 1A27LU is a single component, polyurethane conformal coating, suitable for general printed circuit board applications.
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies.
HumiSeal® 2C51 is a two-component high strength, fast curing silicone encapsulating gel supplied as Parts A and B, suitable for general printed circuit board applications.
HumiSeal® 1B15 is a single component, fast drying, easily repaired, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B15 coating is RoHS Directive 2002/95/EC compliant.