HumiSeal® 1C55 is a single component, VOC-free, low viscosity, fast thermal curing silicone conformal coating. The reduced viscosity and long pot life of HumiSeal® 1C55 make it ideal for dipping and spraying. HumiSeal® 1C55 demonstrates excellent flexibility, contains an optical brightener for inspection under black light and is repairable. HumiSeal® 1C55 coating is RoHS Directive 2011/65/EU compliant.
Overview
HumiSeal® 1C55 is a single component, VOC-free, low viscosity, fast thermal curing silicone conformal coating. The reduced viscosity and long pot life of HumiSeal® 1C55 make it ideal for dipping and spraying. HumiSeal® 1C55 demonstrates excellent flexibility, contains an optical brightener for inspection under black light and is repairable. HumiSeal® 1C55 coating is RoHS Directive 2011/65/EU compliant.
HumiSeal® 1C55 is a single component, VOC-free, low viscosity, fast thermal curing silicone conformal coating. The reduced viscosity and long pot life of HumiSeal® 1C55 make it ideal for dipping and spraying. HumiSeal® 1C55 demonstrates excellent flexibility, contains an optical brightener for inspection under black light and is repairable. HumiSeal® 1C55 coating is RoHS Directive 2011/65/EU compliant.
Overview
HumiSeal® 1C55 is a single component, VOC-free, low viscosity, fast thermal curing silicone conformal coating. The reduced viscosity and long pot life of HumiSeal® 1C55 make it ideal for dipping and spraying. HumiSeal® 1C55 demonstrates excellent flexibility, contains an optical brightener for inspection under black light and is repairable. HumiSeal® 1C55 coating is RoHS Directive 2011/65/EU compliant.
Specifications
| Chemistry | Silicone |
|---|---|
| Curing Conditions | Heat |
| Material | 10 - 15 min @ 105 - 130ºC |
| Volatile Organic Compounds | 0 g/l |
| Cure Time | 10 - 15 min @ 105 - 130ºC |
| Recommended Thickness | 50 - 200 microns |
Downloads
HUM 1C55 Technical Data Sheet
PDFDownload
Related products
HumiSeal® Stripper 1080 Series Products are a range of strippers designed to dissolve cured HumiSeal® acrylic coatings without negatively affecting printed wiring board substrates or components.
HumiSeal® 2A53 is a two component epoxy conformal coating supplied as Parts A and B, suitable for general printed circuit boards and applications where exceptional resistance to solvents or other chemicals is required.
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies.
When necessary, the viscosity of HumiSeal® 1B73 may be adjusted for application purposes, using this compatible thinner.
