HumiSeal® 2A64 is a two component polyurethane conformal coating supplied as Parts A and B, suitable for general printed circuit board applications. HumiSeal® 2A64 is characterized by high solids and low viscosity for ease of application and processing, and it fluoresces under UV light for inspection purposes. HumiSeal® 2A64 coating is MIL-I-46058C qualified, and IPC-CC-830 and RoHS Directive 2011/65/EC compliant.
Overview
HumiSeal® 2A64 is a two component polyurethane conformal coating supplied as Parts A and B, suitable for general printed circuit board applications. HumiSeal® 2A64 is characterized by high solids and low viscosity for ease of application and processing, and it fluoresces under UV light for inspection purposes. HumiSeal® 2A64 coating is MIL-I-46058C qualified, and IPC-CC-830 and RoHS Directive 2011/65/EC compliant.
Overview
Specifications
| Chemistry | Polyurethane |
|---|---|
| Curing Conditions | Heat |
| Material | 3 hrs @ 76°C |
| Volatile Organic Compounds | 25-75 microns |
| Cure Time | 3 hrs @ 76°C |
Related products
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies.
HumiSeal® Stripper 1091 dissolves cured HumiSeal® silicone coatings without negatively affecting printed wiring board substrates.
HumiSeal® Stripper 1080 Series Products are a range of strippers designed to dissolve cured HumiSeal® acrylic coatings without negatively affecting printed wiring board substrates or components.
HumiSeal® 2A53 is a two component epoxy conformal coating supplied as Parts A and B, suitable for general printed circuit boards and applications where exceptional resistance to solvents or other chemicals is required.
