HumiSeal® 2C51 is a two-component high strength, fast curing silicone encapsulating gel supplied as Parts A and B, suitable for general printed circuit board applications. HumiSeal® 2C51 is characterized by room temperature cure and low viscosity for ease of application and contains UV tracer for ease of inspection. The two components of HumiSeal 2C51 are blue and yellow and turn green when mixed. HumiSeal® 2C51 is RoHS Directive EU 2015/863 compliant.
Overview
HumiSeal® 2C51 is a two-component high strength, fast curing silicone encapsulating gel supplied as Parts A and B, suitable for general printed circuit board applications. HumiSeal® 2C51 is characterized by room temperature cure and low viscosity for ease of application and contains UV tracer for ease of inspection. The two components of HumiSeal 2C51 are blue and yellow and turn green when mixed. HumiSeal® 2C51 is RoHS Directive EU 2015/863 compliant.
Overview
Specifications
| Chemistry | Silicone |
|---|---|
| Curing Conditions | Air, Heat |
| Material | 30 minutes @ 70°C or 60 min @ RT |
| Cure Time | 30 minutes @ 70°C or 60 min @ RT |
Related products
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies.
HumiSeal® Stripper 1091 dissolves cured HumiSeal® silicone coatings without negatively affecting printed wiring board substrates.
HumiSeal® Stripper 1080 Series Products are a range of strippers designed to dissolve cured HumiSeal® acrylic coatings without negatively affecting printed wiring board substrates or components.
HumiSeal® 2A53 is a two component epoxy conformal coating supplied as Parts A and B, suitable for general printed circuit boards and applications where exceptional resistance to solvents or other chemicals is required.
