A single component, high solids, UV curable, acrylated polyurethane conformal coating that possesses excellent chemical resistance, surface hardness, flexibility and moisture resistance. Have a secondary cure mechanism that will fully cure any unexposed areas of the coating within 2-3 days at ambient conditions. Fluoresce under UV light to allow coating inspection.
Overview
A single component, high solids, UV curable, acrylated polyurethane conformal coating that possesses excellent chemical resistance, surface hardness, flexibility and moisture resistance. Have a secondary cure mechanism that will fully cure any unexposed areas of the coating within 2-3 days at ambient conditions. Fluoresce under UV light to allow coating inspection.
Overview
Downloads
HumiSeal UV20GEL SYRINGE Technical Data Sheet
pdfDownload
Related products
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies.
HumiSeal® Stripper 1091 dissolves cured HumiSeal® silicone coatings without negatively affecting printed wiring board substrates.
HumiSeal® Stripper 1080 Series Products are a range of strippers designed to dissolve cured HumiSeal® acrylic coatings without negatively affecting printed wiring board substrates or components.
HumiSeal® 2A53 is a two component epoxy conformal coating supplied as Parts A and B, suitable for general printed circuit boards and applications where exceptional resistance to solvents or other chemicals is required.
