Substrate Primers

A two-component, solvent free epoxy coating formulated for porous and non-porous surfaces such as concrete, wood and metal.

A single component universal primer which can be used with Tapecoat cold or hot applied tapes. Meets the most stringent VOC regulations. It is the required primer for TC20, 6025, HT/MB for applications up to 180F.

A two-component, 97% solids moisture tolerant epoxy coating formulated as a primer for porous surfaces.

A low V.O.C., fast drying, single component, primer to be applied on properly prepared surfaces prior to the placement of Royston® sheet membranes.

A spray applied, solvent based, fast drying, single component, primer to be applied on properly prepared surfaces prior to the placement of Royston® sheet membranes.

A solvent based, fast drying, single component, primer to be applied on properly prepared surfaces prior to the placement of Royston® sheet membranes.

An organo-silane compound dispersed in acetone, formulated to improve the adhesion of high-performance coatings and linings to non-porous surfaces that are past allowable recoat window.

A 100% solids, two component, moisture insensitive, modified epoxy adhesive specifically designed for adhering pre-formed closed cell joint seals to a variety of substrates.

A low VOC, solvent based tack coat designed to be used as a bond coat between a substrate and Rosphalt modified asphalt overlay.

A low temperature, solvent based, fast drying, single component, primer to be applied on properly prepared surfaces prior to the placement of Royston® sheet membranes.