HumiSeal® 1C63 is a UV/RTV curing, oxime-type cure silicone conformal coating which provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1C63 is a non-corrosive, single component coating which will cure upon exposure to either a UV light source or atmospheric moisture at ambient or elevated temperatures. The material is tack-free after exposure to UV light. A secondary moisture cure will cure unexposed areas of the coating within 24 hours at ambient temperature, 50% relative humidity. HumiSeal® 1C63 is self-leveling, with excellent weathering resistance. HumiSeal® 1C63 is recognized under UL File Number E105698 and RoHS Directive 2011/65/EC compliant.
Overview
HumiSeal® 1C63 is a UV/RTV curing, oxime-type cure silicone conformal coating which provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1C63 is a non-corrosive, single component coating which will cure upon exposure to either a UV light source or atmospheric moisture at ambient or elevated temperatures. The material is tack-free after exposure to UV light. A secondary moisture cure will cure unexposed areas of the coating within 24 hours at ambient temperature, 50% relative humidity. HumiSeal® 1C63 is self-leveling, with excellent weathering resistance. HumiSeal® 1C63 is recognized under UL File Number E105698 and RoHS Directive 2011/65/EC compliant.
Overview
Specifications
| Chemistry | Silicone |
|---|---|
| Curing Conditions | UV Curing |
| Material | Varies based on equipment |
| Volatile Organic Compounds | 1/8th an Inch |
| Cure Time | Varies based on equipment |
Related products
When necessary, the viscosity of HumiSeal® 1B73 may be adjusted for application purposes, using this compatible thinner.
HumiSeal® Stripper 1080 Series Products are a range of strippers designed to dissolve cured HumiSeal® acrylic coatings without negatively affecting printed wiring board substrates or components.
HumiSeal® 2A53 is a two component epoxy conformal coating supplied as Parts A and B, suitable for general printed circuit boards and applications where exceptional resistance to solvents or other chemicals is required.
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies.
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
