HumiSeal® 2E11 is a room temperature curing two-part epoxy system designed for electronic sealing, encapsulating and potting applications. This product has been formulated with an easy 1:2 volume mix-ratio. HumiSeal 2E11 provides superior adhesion to a wide variety of substrates including most metals and plastics.
Overview
HumiSeal® 2E11 is a room temperature curing two-part epoxy system designed for electronic sealing, encapsulating and potting applications. This product has been formulated with an easy 1:2 volume mix-ratio. HumiSeal 2E11 provides superior adhesion to a wide variety of substrates including most metals and plastics.
Overview
Specifications
| Chemistry | Epoxy |
|---|---|
| Curing Conditions | Air |
| Material | 24 hours @ room temp |
| Cure Time | 24 hours @ room temp |
Related products
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies.
HumiSeal® Stripper 1091 dissolves cured HumiSeal® silicone coatings without negatively affecting printed wiring board substrates.
HumiSeal® Stripper 1080 Series Products are a range of strippers designed to dissolve cured HumiSeal® acrylic coatings without negatively affecting printed wiring board substrates or components.
HumiSeal® 2A53 is a two component epoxy conformal coating supplied as Parts A and B, suitable for general printed circuit boards and applications where exceptional resistance to solvents or other chemicals is required.
