Latest Research & Test Results from GTI and OTD demonstrates Trace-Safe with ‘polymer fiber reinforced solid copper’ is the superior choice for HDD st. Edit or delete it, then start…
Chase Corporation Announces October 6, 2023 Special Meeting Results WESTWOOD, MA and NEW YORK– October 6, 2023 – Chase Corporation (“Chase” or the “Company”) (NYSE American: CCF), a leading global…
…performance and that a variety of factors could cause the Company’s actual results and experience to differ materially from the anticipated results or other expectations expressed in the Company’s forward-looking…
…by the Company are not guarantees of future performance and that a variety of factors could cause the Company’s actual results and experience to differ materially from the anticipated results…
…products please contact: European Enquiries T: + 44(0)1189 442333 E: [email protected] W: www.humiseal.com Indian Enquiries T: + 91 20 66308098 E: [email protected] W: www.humiseal.com USA &Asian Enquiries T: +1781-332-0772 E:…
…www.humiseal.com USA &Asian Enquiries T: +1781-332-0772 E: [email protected] W: www.humiseal.com For European Media enquiries please contact: Tim Rose– EDGE Design T: +44 (0) 7502 333093 E: [email protected] W: www.edgedesignmarketing.com …
…guarantees of future performance and that a variety of factors could cause the Company’s actual results and experience to differ materially from the anticipated results or other expectations expressed in…
…guarantees of future performance and that a variety of factors could cause the Company’s actual results and experience to differ materially from the anticipated results or other expectations expressed in…
…of factors could cause the Company’s actual results and experience to differ materially from the anticipated results or other expectations expressed in the Company’s forward-looking statements. The risks and uncertainties…
…guarantees of future performance and that a variety of factors could cause the Company’s actual results and experience to differ materially from the anticipated results or other expectations expressed in…
…European Enquiries T: + 44(0)1189 442333 E: [email protected] W: www.humiseal.com Indian Enquiries T: + 91 20 66308098 E: [email protected] W: www.humiseal.com USA &Asian Enquiries T: +1781-332-0772 E: [email protected] W: www.humiseal.com…
…Enquiries T: + 44(0)1189 442333 E: [email protected] W: www.humiseal.com Indian Enquiries T: + 91 20 66308098 E: [email protected] W: www.humiseal.com USA & Asian Enquiries T: +1781-332-0772 E: [email protected] W: www.humiseal.com…
…materially from the anticipated results or other expectations expressed in the Company’s forward-looking statements. The risks and uncertainties which may affect the operations, performance, development and results of the Company’s…
…and Graco manufacture pumps that have been used to spray CIM for over 25-years. Binks: Ph: 888.992.4657 Find a distributor: www.binks.comGraco: Ph: 800-690-2894 Find a distributor: www.graco.com CIM can also…
…and Graco manufacture pumps that have been used to spray CIM for over 25-years. Binks: Ph: 888.992.4657 Find a distributor: www.binks.comGraco: Ph: 800-690-2894 Find a distributor: www.graco.com CIM can also…
…materially from the anticipated results or other expectations expressed in the Company’s forward-looking statements. The risks and uncertainties which may affect the operations, performance, development and results of the Company’s…
…Coating Step 2- Pour The Solution Into a Container Step 3 – Mix the Solutions Step 4- Wait for 10 Mins Step 5- Pour the Mix Into the Dispenser Machine…
…Keeping the lights on…. The correct conformal coating can help The use of conformal coating on drive circuitry and LED lead-frames can mitigate corrosive effects of the operating environment. Conformal…
…Modulus @ -60°C, MPa 100 to 500 Glass Transition Temperature (Tg), °C -40 to -45 Linear Shrinkage, % < 1 Refractive Index 1.459 to 1.470 Haze, %, per ASTM D1003…
…required recommended minimum cure requirements. Typical Properties of Cured Material** Tensile Modulus @ -60°C, MPa 100 to 500 Glass Transition Temperature (Tg), °C -40 to -45 Linear Shrinkage, %…
…E105698 IPC-CC-830 and RoHS Directive 2011/65/EU compliant Typical Properties of HumiSeal® UV50LV Density 1.0 to 1.1 g/cm3 Minimum Solids Content 95% Viscosity, per Fed-Std-141, Meth. 4287 80 – 120 centipoise…
…days after UV cure Glass Transition Temperature – DSC -43°C Coefficient of Thermal Expansion – TMA 137ppm/°C Below Tg 311ppm/°C Above Tg Modulus – DMA 0.4MPa @ 25°C Dielectric Withstand…
…Stripper HumiSeal® Stripper 1091 Shelf Life at Room Temperature, DOM 6 months Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 200°C Glass Transition Temperature – DSC < -90°C Tensile Strength,…
…the required recommended minimum cure requirements. Typical Properties of Cured Material** Glass Transition Temperature (Tg), °C -45 to -50 Operating Temperature Range, °C -50 to 125 Shore Hardness, 00 32…
…Transition Temperature (Tg), °C -40 to -45 Linear Shrinkage, % < 1 Refractive Index 1.459 to 1.470 Haze, %, per ASTM D1003 < 0.2 Total Luminous Transmittance, %, per ASTM…
…technical support to discuss your application and review the required recommended minimum cure requirements. Typical Properties of Cured Material** Glass Transition Temperature (Tg), °C -40 to -45 Operating Temperature…
…Temperature (Tg), °C -40 to -45 Linear Shrinkage, % < 1 Refractive Index 1.459 to 1.470 Haze, %, per ASTM D1003 < 0.2 Total Luminous Transmittance, %, per ASTM D1003…
…Solvent Isopropyl alcohol Typical Properties of Cured Material Glass Transition Temperature (Tg), °C -45 to -50 Operating Temperature Range, °C -50 to 125 *All properties given are typical values and…
…-40°C to 125°C Glass Transition Temperature – DSC -40°C Elongation > 100% Shore Hardness, A / D at 20°C 55 / 12 Dielectric Withstand Voltage (Per MIL-I-46058C) >1500V Surface Insulation…
…correct spectral output. HumiSeal®UV20GEL can be cured using arc, microwave, or LED systems. Exact dosage is application dependent, however recommended dosage is 4 J/cm2 for arc and microwave systems and…
…to differ materially from the anticipated results or other expectations expressed in the Company’s forward-looking statements. The risks and uncertainties which may affect the operations, performance, development and results of…
…guarantees of future performance and that a variety of factors could cause the Company’s actual results and experience to differ materially from the anticipated results or other expectations expressed in…
…Thickness 1 mm Adhesion to Primed Steel 2.5 N/mm Adhesion to Backing 2.5 N/mm Elongation 400 % Tensile Strength 4.5 N/mm Cathodic Disbondment <10 mm radial Impact Resistance 3.8 J…
…Solvent Isopropyl alcohol Typical Properties of Cured Material Glass Transition Temperature (Tg), °C -45 to -50 Operating Temperature Range, °C -50 to 125 *All properties given are typical values and…
…/MIN Distance from Source 2.25″ Dosage (J/cm2) UVA 4.746 Dosage (J/cm2) UVA 3.820 UVB 0.000 UVB 4.104 UVC 0.280 UVC 0.963 UVV 5.079 UVV 5.809 Intensity (W/cm2)…
…Temperature (Tg), °C -40 to -45 Linear Shrinkage, % < 1 Refractive Index 1.459 to 1.470 Haze, %, per ASTM D1003 < 0.2 Total Luminous Transmittance, %, per ASTM D1003…
…Modulus @ -60°C, MPa 100 to 500 Glass Transition Temperature (Tg), °C -40 to -45 Linear Shrinkage, % < 1 Refractive Index 1.459 to 1.470 Haze, %, per ASTM D1003…
…the required recommended minimum cure requirements. Typical Properties of Cured Material** Glass Transition Temperature (Tg), °C -45 to -50 Operating Temperature Range, °C -50 to 125 Shore Hardness, 00 32…
…Transition Temperature (Tg), °C -40 to -45 Linear Shrinkage, % < 1 Refractive Index 1.459 to 1.470 Haze, %, per ASTM D1003 < 0.2 Total Luminous Transmittance, %, per ASTM…
…required recommended minimum cure requirements. Typical Properties of Cured Material** Tensile Modulus @ -60°C, MPa 100 to 500 Glass Transition Temperature (Tg), °C -40 to -45 Linear Shrinkage, %…
…technical support to discuss your application and review the required recommended minimum cure requirements. Typical Properties of Cured Material** Glass Transition Temperature (Tg), °C -40 to -45 Operating Temperature…
…curing mechanism results in consistent and reliable performance without concerns about mix ratios or generation of heat. Advantages and properties of Humiseal UV curable adhesives include: nearly instantaneous cure no…
…to http://www.humiseal.com/products/adhesive-solutions/ and http://www.humiseal.com/products/encapsulation-solutions/ Commenting on these new product lines, Keith Waryold, VP of Industrial Material and Technology, said, “As we continue to innovate enabling solutions in the protection of…
…Coating Applications UV Curing Oven Calibration Using a Radiometer How to Improve the Selective Spray Application with Solvent-Based Coatings Temporary Masking Using UV92 Masking Gel to Encapsulate Components Tips to…
…that a variety of factors could cause the Company’s actual results and experience to differ materially from the anticipated results or other expectations expressed in the Company’s forward-looking statements. The…
…differ materially from the anticipated results or other expectations expressed in the Company’s forward-looking statements. The risks and uncertainties which may affect the operations, performance, development and results of the…
…that a variety of factors could cause the Company’s actual results and experience to differ materially from the anticipated results or other expectations expressed in the Company’s forward-looking statements. The…
…the Company’s actual results and experience to differ materially from the anticipated results or other expectations expressed in the Company’s forward-looking statements. The risks and uncertainties which may affect the…
…and recycled gray water. Indoor Environmental Quality IEQ Credit 4.1: Low-Emitting Materials – Adhesives and Sealants (1 point) CIM protective coatings meet or exceed VOC limits. IEQ Credit 4.2: Low-Emitting…
…in one (1) gallon units for smaller projects and we also sell the CIM 1000TG as a dual cartridge. Q3: What are the package sizes for CIM products? 4 1/2-Gallon…