AXIS 991: Multipurpose Adhesive For Plastic and Metal

Product Description

AXIS 991 is suitable for a wide variety of applications that require a fast cure, flexibility, high adhesion, and autoclave resistance. AXIS 991 cures in seconds when exposed to light of the proper wavelength and intensity and achieves excellent adhesion to glass, plastics, and metal. AXIS 991 was specifically designed for bonding stainless steel cannulae into hubs, syringes, and lancets for needle assemblies. Suitable for use in the assembly of disposable medical devices. Axis 991 Medical Device Adhesive is designed for rapid bonding of plastics and metals typically used in the manufacture of medical devices. This product fluoresces blue for in-­line inspection under low-­intensity “black” light (365nm). Resin Designs medical device adhesives contain no nonreactive solvents and cure upon exposure to light. Their ability to cure in seconds enables faster processing, greater output, and lower processing costs. When cured with UV light curing spot lamps, focused beams, or flood lamps, they deliver optimum speed and performance for medical device assembly. This product is in full compliance with the RoHS directives 2002/95/EC and 2003/11EC.

Features: 

• UV/ Visible light cure
• Blue fluorescing
• Moisture resistant

Applications: 

• Needle bonding
• Reservoirs
• Transducer assembly
• Medical potting

Storage:

Store material in cool, dry location at a temperature between 10˚C to 28˚C. Keep from freezing. Material is sensitive to UV and visible light. Refer to packaging-specific quote for shelf life information. Consult MSDS for safe handling recommendations.

ISO – 10993

An ISO 10993 test protocol is an integral part of the quality program for Axis 991. Axis 991 has been qualified to Resin Designs, LLC ISO 10993 protocol as a means to assist in the selection of products for use in the medical device industry. Certificates of compliance are available through the Resin Designs, LLC quality department.