NEXUS adhesives represent a complete line of materials designed and tested for the efficient bonding and assembly of industrial components. Our experienced polymer chemists are experts in interacting with manufacturers in a collaborative problem-solving approach. In addition, our production facilities are fully ISO 9001 certified and products are produced in compliance with applicable ROHS, REACH, and FDA regulations.
Standard structural adhesives properties are listed below.
Custom formulations available upon request.
*The information contained here is provided for product selection purposes only and is not intended to be considered specification or performance data. Under no circumstances will the seller be liable for any loss, damage, expense, or incidental or consequential damage of any kind arising in connection with the use or inability to use its product. Specific conditions of sale and Chase’s limited warranty are set out in detail in Chase corporation terms and conditions of sale. Those terms and conditions are the only sources that contain Chase’s limited warranty and other terms and conditions.
|Product||Type||Hardness||Elong.||Tensile||Work Life||Cure Time |
|Nexus E100-FC||ER||D80||15%||3800||4 min||1 to 6 hr||Clear, fast curing, two part medium viscosity, 1:1 mix ratio system. Cures at room temperature, high strength bonds to a wide variety of substrates. Chemical resistant and excellent electrical insulator.|
|Nexus E100||ER||D74||5%||>4000||5 min||12 hr||Clear, two part epoxy system designed to be used for bond seal and/or repair applications. One to one mix ratio. Resistant to both physical shock as well as exposure to water and other potentially harmful chemicals.|
|Nexus E100-Flex||ER||D75||75%||2500||4 min||48 hr||Amber, mid-viscosity resin system designed for industrial adhesive applications. This two part epoxy is easily mixed, cures at room temperature, and provides high peel resistance and shear strengths. Once cured it is resistant to an extensive range of chemicals; is stable over a wide temperature range; passes|
|Nexus E105||ER||D55||80%||2700||4 min||3 hr||Amber, two part epoxy system. Medium viscosity, fast setting, and cures at room temperature. Clear bond lines with excellent peel strength. Resistant to a wide range of chemicals and solvents and is an excellent electrical insulator.|
|Nexus E125 FLEX||ER||D55||90%||2900||30 min||96 hr||Gray, medium viscosity, two-part epoxy. Once cured, the epoxy has excellent adhesion to metal and plastic; high elongation and tensile strength. This epoxy is hard but will accommodate applications requiring moderate flexibility.|
|Nexus E200||ER||D80||<10%||5000||30 min||24 hr||Amber, two-part epoxy system with room temperature cure. Two to one mix ratio product. Excellent moisture resistance and is ideal for high humidity environments. Excellent resistance to water, chemicals, and thermal and mechanical shock.|
|Nexus E210||ER||D64 to D80||<10%||5400||60 min||24 hr||Amber, two part epoxy system with range of mix ratios and hardness. High bond strength to wide variety of materials. Good electric insulator, resistant to gases, water, petroleum products, and acids.|
|Nexus E260||ER||D80||<10%||5000||120 min||36 hr||Amber, two part epoxy system. Room temperature curing, 2:1 mix ratio, excellent moisture resistance. Ideal for high humidity environments. Mechanical shock and chemical resistant.|
|Nexus E520||ER||5 min||4 hr||Gray, able to mix, apply, and cure underwater. This product is a very versatile adhesive that will work on most applications. Repair vinyl pool liners, fiberglass, light rings, skimmers, main drains, concrete, pool tile and hose repairs. This compound is paintable and sandable. (Other colors available)|
|Nexus U100N||UR||D40||200%||1100||9 min||24 hr||Clear, two component (w/ heat option) cure, general purpose urethane. Low viscosity with 1:1 mix ratio. Medium hardness with good flexibility. Wide range of applications with bonding capabilities to multiple substrates.|
|Nexus U100N-HV||UR||D40||220%||1500||7 min||24 hr||Clear, two component (w/ heat option) cure, general-purpose urethane. Medium/High viscosity, thixotropic material. 1:1 mix ratio and long work life. Medium hardness with good flexibility. Wide range of applications with bonding capabilities to multiple substrates.|
|Nexus UV110||UV EP||D87||4%||5200||UV cure||Clear, one component epoxy-based UV curable (w/ heat option) adhesive. Designed for applications that require the cure speed of a UV active polymer and the chemical resistance and high temperature performance of an epoxy.|
|Nexus UV110-LV||UV EP||D80||4%||5000||UV cure||Clear, one component, low viscosity, epoxy-based UV curable (w/ heat option) adhesive. Designed for applications that require the cure speed of a UV active polymer and the chemical resistance and high temperature performance of an epoxy.|
|Nexus UV600||UV UR||D60||22%||UV cure||Clear, one component, fast curing urethane acrylate that bonds well to a wide variety of different substrates. This product requires direct Uv exposure during cure.|
|Nexus UV700||UV UR||D50||80%||UV cure||Clear, one component, medium viscosity, fast curing urethane acrylate that bonds a wide variety of different substrates. Exhibits good surface wetting and adhesion to glass, metals, and a wide variety of plastic based substrates.|
|Nexus UV800-FR||UV UR||D80||UV cure||Translucent, one component, fast curing flame resistant, UV curable urethane acrylate. Bonds to a wide variety of substrates. Fluoresces under black light for inspection. Passed UL94 V0 standard for flame resistance up to approximately 2mm thickness.|
- Electronics and electrical assemblies
- Automotive and white goods component assembly
- Pool, marine, and recreational device adhesion
- Wood, metals, glass and plastics bonding
- 2 component epoxies
- 2 component polyurethanes
- UV curable epoxies
- UV curable acrylated urethanes