FIP & CIP Gaskets

FIP & CIP Gaskets

FIP / CIP Gaskets

Resin-Designs-gaskets-being-applied-on-a-circuit-board

Resin Designs form-in-place/cure-in place gasketing compounds are designed as solutions to adhesion and sealing challenges in markets including appliances, aerospace and automotive, electronics device assembly, and many others. Supplied in liquid form, they provide versatility and cost-effective alternative to traditional pre-formed gaskets. The products range in viscosity, hardness, tensile strength, and resistance to chemicals. Our polymer chemists are also capable of custom formulations as required to suit your specific needs


Product NameCure MechChem ElongationViscosityThixoShoreAppearanceDescription
CIP UV120

UVUR115%20K-A45Clear/YellowMedium viscosity, one-part, UV cure gasket material with excellent moisture resistance that provides selective release from bonded or coated substrates.
CIP UV120-HV

UVUR150%54K - 384K1.7A45-60Clear/YellowHigh viscosity, one-part UV cure gasket material with excellent vibration and moisture resistance. The high viscosity assists with applications that require reduced sagging.
CIP UV120-FR

UVUR25K-350K3.6A45Clear
CIP UV110-T


UVUR130%180K - 590K7.5A40Clear/YellowHighly thixotropic, one-part, UV-curable gasket with excellent flexibility and resilience. High viscosity thixotropic property allows for non-sagging applications.
CIP UV100-LV


UVUR1000%750-OO25ClearLow viscosity “flowable”, clear, very soft one part UV cure gasket. Will cure in seconds to form a flexible, low-modulus polymer that can provide a high amount of bond strength without imparting stress.
CIP UV100-HV

UVUR500%100K4.2OO10ClearHigh-viscosity, clear, one part UV cure gasket, cures in seconds to form a soft, flexible, low-modulus polymer that can provide a high amount of bond strength without imparting stress. The high viscosity assists with applications that require reduced sagging.
CIP-UV100-T

UVUR450%323K5.3OO48
ClearThixotropic, clear, one part UV cure gasket. The rheology properties are designed to offer ease of dispensing while providing sag resistant application. CIP-UV100-T provides very low hardness, good elongation, resists yellowing, and retains tack.TT
CIP-UV130


UVUR530%25k5.3A60ClearOne part, non-sag paste that bonds well to engineered
plastics and metal substrates. Once cured, CIP-UV130
is ideal for cure-in-place gasket applications that benefit from a slight tack to maintain substrate contact.

Quick Links

Request Sample

Applications
  • Appliance and white goods
  • Electronics device assembly
  • Automotive devices
  • Architectural and glass assemblies

Resin Designs FIP CIP

Try it before you buy it!
Request Sample

FIP CIP Gaskets

FIP CIP GAskets 3

FIP CIP gaskets

Contact Us