Urethane Acrylate Encapsulation Solution 2UV11

HumiSeal® 2UV11 encapsulant is:

  • 2 component UV curable
  • A soft polymer for vibration protection

HumiSeal® 2UV11 encapsulant has:

  • No VOCs or solvent
  • High-elongation/mechanical and thermal shock resistance
  • Superior adhesion to a variety of substrates

Application of HumiSeal® 2UV11 encapsulant

Cleanliness of the substrate is of extreme importance for the successful application of HumiSeal 2UV11. Surfaces must be free of moisture, dirt, wax, grease, flux residues and all other contaminants. Encapsulants can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue “no clean” materials.  Users should perform adequate testing to confirm compatibility between the encapsulants and their particular assembly materials, process conditions and cleanliness level.

HumiSeal® 2UV11 is a two-component polyurethane system. This system can realize a tack-free surface and functional strength with UV exposures. A secondary reaction ensures shadowed areas are completely polymerized.

Technical or Safety Data Sheet | Free Sample

Chemistry Urethane Acrylate
Viscosity Part A (CPs) 8,000
Viscosity Part B (CPs)  7,000
Mix Ratio  1:1
Pot Life (min)* When exposed to UV or 7 min in shadow areas
Handling Time (min)* 15
Full Cure** 24 hrs @ RT
Cure Type UV-gelable w/ 2 component
Color Clear
Hardness A30
Operating Temp (°C) -50 to 110 C
Applications Potting, Encapsulation
Substrates Potting, Encapsulation

Request a Adhesive Solution Free Sample