Urethane Acrylate Encapsulation Solution 2UV10
HumiSeal® 2UV10 encapsulant is:
- 2 component UV curable
- High viscosity gel
HumiSeal® 2UV10 encapsulant has:
- No VOCs or solvent
- High-elongation/mechanical and thermal shock resistance
- Superior adhesion to a variety of substrates
- RoHS and REACH compliance
Application of HumiSeal® 2UV10 encapsulant
Cleanliness of the substrate is of extreme importance for the successful application of HumiSeal 2UV10. Surfaces must be free of moisture, dirt, wax, grease, flux residues and all other contaminants. Encapsulants can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue “no clean” materials. Users should perform adequate testing to confirm compatibility between the encapsulants and their particular assembly materials, process conditions and cleanliness level.
HumiSeal® 2UV10 is a two-component UV gellable polyurethane system. This system can realize a tack-free surface and functional strength with UV exposures as short as 20 seconds. A secondary reaction ensures shadowed areas are completely polymerized.
Technical or Safety Data Sheet | Free Sample
| Chemistry | Urethane Acrylate |
| Viscosity Part A (CPs) | 25,000 |
| Viscosity Part B (CPs) | 25,000 |
| Mix Ratio | 1:2 |
| Pot Life (min)* | When exposed to UV or 7 min in shadow areas |
| Handling Time (min)* | 15 |
| Full Cure** | 24 hr @ RT |
| Cure Type | UV-gelable w/ 2 component |
| Color | Clear |
| Hardness | D39 |
| Operating Temp (°C) | -50 to 120 C |
| Applications | Potting, Encapsulation |
| Substrates | Potting, Encapsulation |
Other products in this chemistry include:
