…touch up only. Brush must be cleaned with solvent promptly after use. Curing HumiSeal® UV80 is a highly crosslinked coating. To achieve maximum crosslinking density, the product must be exposed…
…promptly after use. Curing HumiSeal® UV40 LED is a highly crosslinked coating. In order to achieve maximum crosslinking density, the product must be exposed to the correct spectral output. Lamp…
…1:1 mix ratio. Flexible, low-stress encapsulant for use in wide variety of electrical and electronic assemblies. Provides good protection against high humidity, mechanical shock. Chemistry: Urethane Pot life (min):60 Substrates:Metals,…
…depend upon its thickness and age. A cured acrylic coating of normal thickness should be completely dissolved within 30 minutes at room temperature. Use of additional heat is not required….
…by weight per Fed-Std-141, Meth. 4044 27.5 ± 2 % Viscosity, per Fed-Std-141, Meth. 4287 250 ± 20 centipoise VOC 674 grams/litre Drying Time to Handle per Fed-Std-141, Meth. 4061…
…use. Curing HumiSeal® UV500 is a highly crosslinked coating. In order to achieve maximum crosslinking density, the product must be exposed to the correct spectral output. Humiseal has modelled the…
…pound sterling against the U.S. dollar. This affects our U.K.-based operations, who make U.S. dollar-denominated sales into the Middle East.” Mr. Chase also commented, “Intelligently growing the business and reestablishing…
…release. EBITDA and Adjusted EBITDA are non-GAAP financial measures. The Company believes that EBITDA and Adjusted EBITDA are useful performance measures as they are used by its executive management team…
…of rubber-modified bitumen adhesive. Maflowrap FBT is part of a protection system developed for steel tank bases and has been specially developed to wrap directly onto Chase’s Longwrap Petrolatum Tapes….
…printed cloth side and a heavier cured rubber side. Sample | Data Sheets S379 extra strength semi-conducting nylon tape. use as a strand shield tape for large diameter core applications…
…U.S. dollars, nearly fully offsetting losses recognized in Q1 and Q2.” Mr. Chase also commented, “Our balance sheet remains strong. As of May 31, 2018, the Company’s cash on hand…
…intentional unfair practice or inappropriate action. Protection and Proper Use of Company Assets Directors shall not use Company assets, labor or information for their personal benefit or gain. Insider Trading…
…UV exposure. Features & Benefits Ideal for windows, doors, joints, etc. Provides watertight seal Prevents corrosion Use 4EvaSeal ® Double Sided Tape For: Residential use Commercial use RV/Camper and…
…In-service temperatures up to 300°F (149°C). Does not require the use of a primer prior to application. Features & Benefits Ideal for use on most roof types Service…
…release. EBITDA and Adjusted EBITDA are non-GAAP financial measures. The Company believes that EBITDA and Adjusted EBITDA are useful performance measures as they are used by its executive management team…
…pound sterling against the U.S. dollar. This affects our U.K.-based operations, who make U.S. dollar-denominated sales into the Middle East.” Mr. Chase also commented, “Intelligently growing the business and reestablishing…
…original solidifier for use in medical and food testing applications. ZapLoc solidifies both salinated and body fluids quickly and effectively. Improves the safety of healthcare professionals and patients alike. Available…
…skin. Further supporting the low toxicity of SAPs was the U.S. Food & Drug Administration’s 2001 approval of sodium polyacrylate SAPs for use as in indirect food contact. Following approval,…
…Free Sample Superabsorbent Polymers are around us being used everywhere*. *use desktop for better display About Zappa-Stewart Superabsorbent polymers (SAP) are used in a wide range of industrial and…
…available Applications include sludge, sediment, drilling mud, etc. Superior Efficiency = Cost Savings Learn more. Zap-Loc: Medical & Lab Solidifier ZapLoc is the original solidifier for use in medical and…
…block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. ZapZorb: Environmental Solidifier Zapzorb…
…require rapid solidification of liquid-bearing wastes and contaminated media. Some characteristics include: Variable particle sizes available Applications Include sludge, sediment, drilling mud, etc. Superior Efficiency = Cost Savings Learn more….
…used for decades for environmental applications that require rapid solidification of liquid-bearing wastes and contaminated media. Some characteristics include: Variable particle sizes available Applications Include sludge, sediment, drilling mud, etc….
…700 – 750 microns was used during the development of the minimum required dosage values recommended below. If a different adhesive thickness is used, process adjustments may be required.” …
…non-GAAP financial measures to Chase’s GAAP financial results are included at the end of this release. See also “Use of Non-GAAP Financial Measures” below. Adam P. Chase, President and Chief…
…the minimum required dosage values recommended below. If a different adhesive thickness is used, process adjustments may be required.” Vivid CureTM UV6041 Recommended Minimum Dose (J/cm2) Requirements Wavelength (nm) UVA…
…release. EBITDA and Adjusted EBITDA are non-GAAP financial measures. The Company believes that EBITDA and Adjusted EBITDA are useful performance measures as they are used by its executive management team…
…required dosage values recommended below. If a different adhesive thickness is used, process adjustments may be required.” Vivid CureTM UV7041 Recommended Minimum Dose (J/cm2) Requirements Wavelength (nm) UVV 395nm…
…dosage values recommended below. If a different adhesive thickness is used, process adjustments may be required.” Vivid CureTM UV7061T Recommended Minimum Dose (J/cm2) Requirements Wavelength (nm) UVV 395nm 5.0…
…dosage values recommended below. If a different adhesive thickness is used, process adjustments may be required.” Vivid CureTM 806-VLS Recommended Minimum Dose (J/cm2) Requirements Wavelength (nm) UVV 395nm 5.0…
…of 700 – 750 microns was used during the development of the minimum required dosage values recommended below. If a different adhesive thickness is used, process adjustments may be required.”…
…pound sterling against the U.S. dollar. This affects our U.K.-based operations, who make U.S. dollar-denominated sales into the Middle East.” Mr. Chase also commented, “Intelligently growing the business and reestablishing…
…websites can be accessed through the Chase Corporation website. For users, this will be a seamless transition. For more information, contact: Christian Silahian Digital Content Marketing Manager [email protected] Website: www.chasecorp.com…
…& Co. Inc. (NYSE: KKR), please visit KKR’s website at www.kkr.com. For additional information about Global Atlantic Financial Group, please visit Global Atlantic Financial Group’s website at www.globalatlantic.com. Media…
…dirt. Fluoresces under UV for ease of inspection and is easily repaired. Easy removal using Humiseal® Strippers. Range of preblends thinners available for different application methods Compliant with GB30981-2020 Learn…
…on component edges, when compared to other similar coatings. HumiSeal® 1B59 SEC is formulated for effective application using atomized spray application methods, although other methods can also be used. HumiSeal®…
…and other professional handheld products have benefited from the use of selective coating for environmental protection and robustness. A practical interactive defect guide also allows users to see defect coating…
…the life of the product. A key requirement in ensuring consistent device output and life, can be accomplished through conformal coating use. Further information on LEDs can be found here….
…should not be used in presence of open flame or sparks. Use only in well-ventilated areas to avoid inhalation of vapors or spray. Avoid contact with skin and eyes. Consult…
…end-use environments where risk of degradation in performance from humidity, salt-spray, noxious gases and other corrosion sources. Advantages of conformal coating in automotive electronics include: Reduced use of protective enclosures…
…D1475 0.92g/cm³ Solids Content, % by weight per Fed-Std-141, Meth. 4044 30 % Viscosity, per Fed-Std-141, Meth. 4287 750 +/- 350 centipoise VOC 644 grams/litre Drying Time to Handle per…
…is a must. In the same way, UL recognition guarantees our products’ safety in use and clears the way for their use in the US and other equally demanding marketplaces”….
…repaired, refurbished and upgraded. Therefore, the degree of re-workability and reliability of the coating material needs to be thoroughly evaluated. The costs of failure, both in direct fiscal cost and…
Stripper 1091s HumiSeal® Stripper 1091 is: compatible with all HumiSeal silicone coatings. compliant with RoHS directive 2015/863/EU safe for use on printed circuit board assemblies. compatible with metals, PTFE, polyethylene,…
…or UVC exposure. Delivering superior protection and value for medium and high volume PCB manufacturing applications. The extremely fast curing enables short cycle times and maximum production speeds. The completely…
…available in the USA. Stripper 1100 has: no halogens or aromatics. low-volatility Directions for Use Immerse the component or printed circuit board assembly into HumiSeal® Stripper 1100. The rate at…
…the minimum required dosage values recommended below. If a different adhesive thickness is used, process adjustments may be required.” Vivid CureTM UV6041 Recommended Minimum Dose (J/cm2) Requirements Wavelength (nm) UVA…
…and Safety regulations. Use only in well-ventilated areas to avoid inhalation of vapors or spray. Avoid contact with skin and eyes. Consult SDS prior to use. Other products in this…
…component, fast drying, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B73/730EU is specially formulated with a new solvent blend to reduce bubbles during application. HumiSeal® 1B73/730EU…
…ASTM D1475 0.95 ± 0.02 g/cm³ Solids Content, % by weight per Fed-Std-141, Meth. 4044 44 ± 2 % Viscosity, per Fed-Std-141, Meth. 4287 180 ± 20 centipoise VOC 521grams/litre…