…safety precautions should be observed: Use only in well-ventilated areas. Protective gloves and goggles should be worn. In case of prolonged skin contact, wash with water. • In case of…
…extreme importance for the successful application of a conformal coating. Surfaces must be free of moisture, dirt, wax, grease, flux residues and all other contaminants. Contamination under the coating could…
…HumiSeal® UV80, non-alcohol based solvents should be used. HumiSeal® Thinner 73, 521or 521EU are recommended. Rework HumiSeal® UV80 is a highly crosslinked UV cured coating. The cured film has a…
…in full compliance with the RoHS Directive 2002/95/EC. HumiSeal® Stripper 1080A is safe for use on epoxy markings, epoxy substrates, solder, copper, silver, gold and nickel plating. It will swell…
…coating materials as they are easy to apply and remove, with a wide process window for use. Acrylic coatings dry rapidly, are fungus resistant and provide long pot life. Additionally,…
…assembled with low residue, “no clean” assembly materials. Users should perform adequate testing to confirm compatibility between the conformal coating and their particular assembly materials, process conditions and cleanliness level….
…flame or sparks. Use only in well-ventilated areas to avoid inhalation of vapours or spray. Avoid contact with skin and eyes. Consult SDS prior to use. Density, per ASTM D1475…
…Temporary storage at 40C, for example during transport, should not deteriorate the stability of the material. Prior to use, allow the product to equilibrate for 24 hours at room temperature….
…by weight per Fed-Std-141, Meth. 4044 27.5 ± 2 % Viscosity, per Fed-Std-141, Meth. 4287 250 ± 20 centipoise VOC 674 grams/litre Drying Time to Handle per Fed-Std-141, Meth. 4061…
…residue, “no clean” assembly materials. Users should perform adequate testing to confirm compatibility between the conformal coating and their particular assembly materials, process conditions and cleanliness level. Please contact HumiSeal®…
When: July 27th and 28th . Where: Online Register to get your free ticket http://smtconnect.com/tickets…
…results are included at the end of this release. See also “Use of Non-GAAP Financial Measures” below. Adam P. Chase, President and Chief Executive Officer, commented, “The Zappa Stewart acquisition…
…financial results for the quarter ended November 30, 2017. HIGHLIGHTS – Q1 2018 vs. Q1 2017 GAAP Financials Revenue of $61.92 million, up $0.56 million, or 1%, from $61.36 million…
…applied to complex pipes, valves, joints etc? Yes, Maflowrap FBT is designed to conform to complex joints, risers, posts, tank bases, and other intricate shapes. Can Longseal FBT protect assets…
…$3.29, up $0.37, or 13%, from $2.92 EBITDA of $56.19 million, up $0.39 million, or 1%, from $55.79 million Adjusted EBITDA of $55.54 million, up $1.80 million, or 3%, from…
…Company. “Immediate family” includes a Director’s spouse, parent, child, sibling, mother-in-law, father-in-law, son-in-law, daughter-in-law, brother-in-law, sister-in-law and anyone who resides in the Director’s home. Corporate Opportunities Directors are prohibited from:…
…where extra binding and cut resistance are required. S-379 will bond only to insulating compounds extruded in place over the surface. Sample | Data Sheets S469R semi-conducting, high yield, vulcanized,…
…barrier against water intrusion. Wood, plastics, metals, and most common construction materials. Contact Us Useful Links Blogs & News Technical Library Contact Us Let’s connect and never miss an update…
…UV exposure. Features & Benefits Ideal for windows, doors, joints, etc. Provides watertight seal Prevents corrosion Use 4EvaSeal ® Double Sided Tape For: Residential use Commercial use RV/Camper and…
…Free Sample Superabsorbent Polymers are around us being used everywhere*. *use desktop for better display About Zappa-Stewart Superabsorbent polymers (SAP) are used in a wide range of industrial and…
…available Applications include sludge, sediment, drilling mud, etc. Superior Efficiency = Cost Savings Learn more. Zap-Loc: Medical & Lab Solidifier ZapLoc is the original solidifier for use in medical and…
…results are included at the end of this release. See also “Use of Non-GAAP Financial Measures” below. Adam P. Chase, President and Chief Executive Officer, commented, “The Zappa Stewart acquisition…
…financial results for the quarter ended November 30, 2017. HIGHLIGHTS – Q1 2018 vs. Q1 2017 GAAP Financials Revenue of $61.92 million, up $0.56 million, or 1%, from $61.36 million…
…original solidifier for use in medical and food testing applications. ZapLoc solidifies both salinated and body fluids quickly and effectively. Improves the safety of healthcare professionals and patients alike. Available…
…Zappa Stewart SAPs include: long term liquid retention, absorbency under load, and functional additive blending. What can I use Superabsorbent Polymers for? Environmental remediation Oil and gas exploration Horizontal directional…
…block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. ZapZorb: Environmental Solidifier Zapzorb…
…require rapid solidification of liquid-bearing wastes and contaminated media. Some characteristics include: Variable particle sizes available Applications Include sludge, sediment, drilling mud, etc. Superior Efficiency = Cost Savings Learn more….
…used for decades for environmental applications that require rapid solidification of liquid-bearing wastes and contaminated media. Some characteristics include: Variable particle sizes available Applications Include sludge, sediment, drilling mud, etc….
…curable adhesives are best used in situations requiring a clean application or in a high-volume manufacturing environment. [table “” not found /]
Quick Links Blog Need to Talk? UV Curable…
…a high strength, chemical resistant, low outgassing polymer system capable of surviving exposure up to 155°C. This product requires direct UV exposure during cure. Because of the variability of different…
…a high strength, chemical resistant, low outgassing polymer system capable of surviving exposure up to 155°C. This product requires direct UV exposure during cure. Because of the variability of different…
…700 – 750 microns was used during the development of the minimum required dosage values recommended below. If a different adhesive thickness is used, process adjustments may be required.” …
…Temperature (Tg), °C -40 to -45 Linear Shrinkage, % < 1 Refractive Index 1.459 to 1.470 Haze, %, per ASTM D1003 < 0.2 Total Luminous Transmittance, %, per ASTM D1003…
…financial results for the quarter ended November 30, 2017. HIGHLIGHTS – Q1 2018 vs. Q1 2017 GAAP Financials Revenue of $61.92 million, up $0.56 million, or 1%, from $61.36 million…
Vivid Cure™ UV7041 LOW STRESS, LIQUID OPTICALLY CLEAR ADHESIVE (LOCA) Fast curing, water-white clear, urethane acrylate designed for utilization as an LCD interface adhesive. This product is a soft, flexible,…
…dosage values recommended below. If a different adhesive thickness is used, process adjustments may be required.” Vivid CureTM UV7061T Recommended Minimum Dose (J/cm2) Requirements Wavelength (nm) UVV 395nm 5.0…
Vivid Cure™ 806-UVA LOW STRESS, LIQUID OPTICALLY CLEAR ADHESIVE (LOCA) Fast curing, water-white clear, urethane acrylate designed for utilization as an LCD interface adhesive. This product is a soft, flexible,…
…results are included at the end of this release. See also “Use of Non-GAAP Financial Measures” below. Adam P. Chase, President and Chief Executive Officer, commented, “The Zappa Stewart acquisition…
…stored between 8°C – 28°C in tightly closed, light-blocking containers, away from direct sunlight. Keep from freezing. Allow material to equilibrate to process area temperature for 24 hours before use….
…of $77.48 million, up $8.48 million, or 12%, from $68.99 million Operating income of $13.81 million, down $2.61 million, or 16%, from $16.43 million Net income of $11.16 million, down…
…& Co. Inc. (NYSE: KKR), please visit KKR’s website at www.kkr.com. For additional information about Global Atlantic Financial Group, please visit Global Atlantic Financial Group’s website at www.globalatlantic.com. Media…
…and a more contemporary look and feel. Adam P. Chase, President, and Chief Executive Officer, commented, “The main goal of this redesign and domain consolidation is to provide our customers…
…on component edges, when compared to other similar coatings. HumiSeal® 1B59 SEC is formulated for effective application using atomized spray application methods, although other methods can also be used. HumiSeal®…
…conformal coating. Surfaces must be free of moisture, dirt, wax, grease, flux residues and all other contaminants. Contamination under the coating could cause problems that may lead to assembly failures….
…successful application of a conformal coating. Surfaces must be free of moisture, dirt, wax, grease, flux residues and all other contaminants. Otherwise, ionic or organic residues on the substrate could…
…importance for the successful application of a conformal coating. Surfaces must be free of moisture, dirt, wax, grease, and all other contaminants. Otherwise, ionic or organic residues on the substrate…
…and Safety regulations. Use only in well-ventilated areas to avoid inhalation of vapors or spray. Avoid contact with skin and eyes. Consult SDS prior to use. Other products in this…
…stored between 8°C – 28°C in tightly closed, light-blocking containers, away from direct sunlight. Keep from freezing. Allow material to equilibrate to process area temperature for 24 hours before use….
…Systems and SCH Technologies) and industry expert, Bob Willis, the CD-ROM provides a simple guide to the use of coatings, their application processes, product benefits, inspection and quality control. The…
…end-use environments where risk of degradation in performance from humidity, salt-spray, noxious gases and other corrosion sources. Advantages of conformal coating in automotive electronics include: Reduced use of protective enclosures…