…CIP- UV100-T has lower hardness, good elongation, resists yellowing, and retains tack. APPLICATIONS: Gaskets FEATURES: Moisture resistance High thixotropy Non-yellowing Retains tack SUBSTRATES: Various Try it before you buy it!…
…traditional elastomeric gaskets. This material is unique among high-performance sealing materials because of its ease of use and its ability to conform, coat and self-heal, yet still be easily re-entered….
…Vibration Dampening FEATURES: RoHS & Reach Compliant Low Viscosity Water-Resistant SUBSTRATES: Plastics Metals Glass Try it before you buy it! Request Sample Quick Links Blog Technical Data Sheet Need to…
CIP-UV120 FR CIP-UV120 FR CIP-UV120-FR is a flame-resistant version of CIP-UV120-HV. CIP-UV120-FR has a paste-life viscosity for applications requiring non-sag behavior and high thixotropic index allowing easy dispensing. CIP-UV120- FR…
…Gaskets Vibration Dampening FEATURES: High viscosity Non-sag High Thixotropic Index SUBSTRATES: Plastics Metals Ceramics Try it before you buy it! Request Sample Quick Links Blog Technical Data Sheet Need to…
…benefit from a slight tack to maintain substrate contact. APPLICATIONS: Gaskets FEATURES: Non-sag UV-curable Slight surface tack SUBSTRATES: Plastics Metals Try it before you buy it! Request Sample Quick Links…
…corrosion of dissimilar metal surfaces. These products thus provide either EMI shielding or grounding along with sealing in a single product. Quick Links Blog Technical Data Sheet Need to Talk?…
…“23” not found /] Quick Links Blog Technical Data Sheet Need to Talk? Request Sample Applications EMI and RFI shielding Aerospace Radar and antenna Type Pre-cured gel with aluminum wire…
…strength without imparting stress. Once cured, CIP-UV100-HV exhibits excellent moisture resistance. CIP-UV100-HV requires direct UV exposure to cure. APPLICATIONS: Gaskets FEATURES: Non-yellowing Low glass transition Retains tack Moisture resistance SUBSTRATES:…
…bond strength without imparting stress. Once cured, CIP-UV100-LV exhibits excellent moisture resistance. CIP-UV100-LV requires direct UV exposure to cure. APPLICATIONS: Gaskets FEATURES: Non-yellowing Low glass transition Retains tack SUBSTRATES: Various…
…into multiyear leases at both locations. The purchase was funded from a combination of a $65,000,000 draw on Chase’s existing revolving credit facility and available cash on hand. Adam P….
…high moisture environments. UV500 can also be easily removed for rework and repair of coated units. Further information on HumiSeal’s new range of products can be found online at: http://www.humiseal.com/about-us/new-products…
…Stoneleigh Park. In an online world this is a unique opportunity to see, hear and touch ‘What’s New in Electronics’, so register for your free entry ticket now at www.wnie.co.uk/visit…
…directly from HumiSeal or from our channel partners. Standard sizes specific board designs are available. For available sizes and custom design information go to: http://www.humiseal.com/products/masking-products/masking-tapes/ Commenting on this new generation…
…and we believe that the resulting CD-ROM is testament to the effort that everyone has put into its production”. CD-Roms are priced at £99.00 each excluding local taxes and delivery….
…we meet the exact product requirements for our customers. There are many synergies between our companies that will allow us to effectively supply and support coating solutions throughout Southern Africa.”…
…Forum, come and visit our booth #34. When: Thursday, August 15, 2019 Where: Misión Grand Juriquilla, Queretaro Blvd Villas Del Meson 56 Juriquilla, QR 76230 For more information visit: https://www.smta.org/expos/#queretaro…
…Expo & Tech Forum, come and visit our booth #707. When: October 23-24, 2019 Where: Av. Mariano Otero #1449, CP Verde Valle, Guadalajara, Jal 44550 For more information visit: https://www.smta.org/expos/#guadalajara…
…water intrusion on windows and doors. In-service temperature as high as 300°F (149°C). Butyl Flashing Tape does not require the use of a primer in order to apply in most…
…into multiyear leases at both locations. The purchase was funded from a combination of a $65,000,000 draw on Chase’s existing revolving credit facility and available cash on hand. Adam P….
Factory Applicator Training For more than 50-years CIM. Industries Inc. has led the liquid storage and containment industry with a product line that delivers long-term solutions to virtually every containment…
…payable to C.I.M. Industries Inc. Mail to: C.I.M. Industries Inc. 23 Elm Street Peterborough, NH 03458 Attn: Applicator Training Let’s connect and never miss an update or news from us….
Packaging Zappa Stewart’s 200,000 sqft of production space allows for flexibility in packaging as well as sieving, grinding and blending operations. Through our wide variety of packaging capabilities, we offer…
…Inc. for a purchase price of approximately $2,100,000, pending any working capital adjustments and excluding any future royalty payments to be made by the buyer. The transaction, entered today, is…
…light-blocking containers, away from direct sunlight. Keep from freezing. Allow material to equilibrate to process area temperature for 24 hours before use. Please refer to product labeling for shelf-life information….
…minimum dosage values required to properly crosslink HumiSeal Vivid Cure™ UV6041. Due to the spectral output differences emitted between LED and mercury vapor systems, wavelength-specific minimum requirements will vary. 365nm…
…material is cold applied like conventional tapes and grommets or gaskets. It has sealing capabilities similar to high- performance potting compounds and is superior in conformability to traditional elastomeric gaskets….
…(GPS-CIS-N1-0075), 0.125” (CPS-CIS-N1-0125), 0.167” (CPS-CIS-N1-0167), and 0.235” (CPS-CIS-N1-0235). Typical Properties of Material* Chemical Class (Shell/Core) Silicone/Polyester -0075, Force @ 25% Compression, gm 158 -0125, Force @ 25% Compression, gm 100…
…into multiyear leases at both locations. The purchase was funded from a combination of a $65,000,000 draw on Chase’s existing revolving credit facility and available cash on hand. Adam P….
…be used as an alternate to CIM 61TN Epoxy Primer Useful Links Technical Library Need to Talk? Blog Let’s connect and never miss an update or news from us. arrows…
…block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. ZapZorb: Environmental Solidifier Zapzorb…
…no potential for seam failure. Q13: How can I buy CIM products? CIM materials can be purchased through stocking distributors. To find the distributor nearest you please contact Chase Corporation….
…light-blocking containers, away from direct sunlight. Keep from freezing. Allow material to equilibrate to process area temperature for 24 hours before use. Please refer to product labeling for shelf-life information….
…cleaned with solvent promptly after use. Curing HumiSeal® UV80LED is a highly crosslinked coating. To achieve maximum crosslinking density, the product must be exposed to the correct spectral output. HumiSeal…
…a transparent film with slight blue tint visible at higher thickness levels. Strong dielectric properties will provide unmatched circuit protection. This new 100% solid material with zero grams per liter…
…be accelerated by applying a slightly elevated temperature. This is an environmentally friendly coating which has zero VOCs and is 100% solids upon mixing. The cured 2C51 is a transparent…
…coater application without the need for pre-heating Have excellent adhesion. Have excellent moisture resistance. Fluorescence under UV light to allow coating inspection. Be cured tack-free using a mercury arc/microwave lamp…
…using safe and efficient UVA or visible light. As a result, these products are 100% VOC free, with limited concerns regarding environmental or industrial hygiene impacts. They have been designed…
…Toughened adhesive or encapsulant designed for high humidity environments. High viscosity with 2:1 mix ratio. High resistance to physical shock, exposure to water, or chemicals. Chemistry: Epoxy Pot life (min):120…
…speeds. It’s unique, dual cure chemistry eliminates the need for hazardous solvents and thinners, while the secondary moisture cure provides assurance of cure in hard to reach or shadow areas….
…an advantage in applications that require added thermal and mechanical shock cycle characteristics. UV50 products provide superior protection and value for medium and high-volume PCB manufacturing applications. Curing in seconds…
…% Operating Temperature Range -50 to 150 °C Applies easily by syringes, dispensing machines. Keeps contact points and connections free of coating. Will not tarnish gold, tin, copper, phosphor bronze…
…to allow for easy inspection. Properties of the UV40 product family include: 100% solids, no solvents or thinners required, minimal environmental impact MIL-I-46058C qualified versions, IPC-CC-830, and ROHS 2011/65/EC compliant…
…residue “no clean” materials. Users should perform adequate testing to confirm compatibility between the adhesives and their particular assembly materials, process conditions and cleanliness level. HumiSeal® 2E33-G is long work…
…minimum dosage values required to properly crosslink HumiSeal Vivid Cure™ UV6041. Due to the spectral output differences emitted between LED and mercury vapor systems, wavelength-specific minimum requirements will vary. 365nm…
…process conditions and cleanliness level. HumiSeal® 2A20 is a 2-component (w/ heat option) cure, general purpose urethane adhesive/encapsulant. Medium viscosity with 1:1 mix ratio. Medium hardness with good flexibility. Wide…
…tapes and dots provide a clean edge when demasking. Masking tapes and dots can be provided in custom sizes. Please contact a HumiSeal representative or authorized distributor for more information….
…2E32-G. Surfaces must be free of moisture, dirt, wax, grease, flux residues and all other contaminants. Adhesives can be successfully applied to substrates that have been cleaned prior to coating…
…year-over-year swing in foreign exchange and a comparatively unfavorable tax rate were other notable items. “Maintaining and growing margins and quality of earnings remains our focus,” noted Mr. Chase. “We…