…Viscosity) versions. This product is a soft, flexible, low modulus polymer that provides a high amount of bond strength without imparting stress. This is a non-yellowing adhesive that exhibits excellent…
…Inc. for a purchase price of approximately $2,100,000, pending any working capital adjustments and excluding any future royalty payments to be made by the buyer. The transaction, entered today, is…
…material is cold applied like conventional tapes and grommets or gaskets. It has sealing capabilities similar to high- performance potting compounds and is superior in conformability to traditional elastomeric gaskets….
…Deflection for 5 kg, kg 0.23 -0075, Burst Pressure after 30s, psi No Leak at 50 PSI -0125, Burst Pressure after 30s, psi 30 Antifreeze, % wt. change after immersion…
…and locations, with plans to integrate Zappa Stewart into its ERP platform in the coming months to further enhance existing operational, development and engineering expertise. Zappa Stewart is a solutions…
…to 150°C Thermal Shock, per IPC-TM-650 2.6.7.1, Class 3 -65°C to 125°C Glass Transition Temperature – DSC 45°C Dielectric Withstand Voltage (Per MIL-I-46058C) >1500V Moisture Insulation Resistance (Per IPC CC830…
…into the material under specified conditions. Indentation hardness is inversely related to the penetration and is dependent on the elastic modulus and viscoelastic behavior of the material. Insulation resistance A…
…should be carried out in accordance with local and National Health and Safety regulations. Use only in well-ventilated areas to avoid inhalation of vapor. Avoid contact with skin and eyes….
…products are qualified to MIL-I-46058C, IEC 60664-3, UL 746E and IPC-CC-830 standards. HumiSeal is an ISO TS-16949 qualified supplier. HumiSeal® and Resign Designs are part of the Chase Electronic and…
…- After squeezing the material 3 times into a waste disposal to fully mix the material dispense the adhesive. Gel time is 8-10 mins. Allow 24 hrs to fully cure….
…Withstand Voltage, per MIL-I-46058C >1500 volts Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 3.5 Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.028 Insulation Resistance, per MIL-I-46058C…
…tapes and dots provide a clean edge when demasking. Masking tapes and dots can be provided in custom sizes. Please contact a HumiSeal representative or authorized distributor for more information….
…to a variety of substrates Application of HumiSeal® 2E33-G: Cleanliness of the substrate is of extreme importance for the successful application of HumiSeal 2E33-G. Surfaces must be free of moisture,…
…Viscosity) versions. This product is a soft, flexible, low modulus polymer that provides a high amount of bond strength without imparting stress. This is a non-yellowing adhesive that exhibits excellent…
…ensure that it is only applied in an environment where the ambient relative humidity is at 60% or less. Application of the coating when the RH is higher than 60%…
…Operating temperature range -65°C to 150°C Thermal Shock, per IPC-TM-650 2.6.7.1, Class 3 -65°C to 125°C Glass Transition Temperature – DSC 45°C Dielectric Withstand Voltage (Per MIL-I-46058C) >1500V Surface Insulation…
…shock performance as compared to previous generation products including UV40 and UV500. UV500-2 resists cracking when subjected to increased environmental cycle counts common in industries such as automotive and white…
…using safe and efficient UVA or visible light. As a result, these products are 100% VOC free, with limited concerns regarding environmental or industrial hygiene impacts. They have been designed…
…light-blocking containers, away from direct sunlight. Keep from freezing. Allow material to equilibrate to process area temperature for 24 hours before use. Please refer to product labeling for shelf-life information….
…cleanliness level. HumiSeal® 2E32-G is a two-part, silver filled epoxy system designed to be used as a solder replacement. This free-flowing liquid can be cured at room temperature in 24-48…
…an advantage in applications that require added thermal and mechanical shock cycle characteristics. UV50 products provide superior protection and value for medium and high-volume PCB manufacturing applications. Curing in seconds…
…to allow for easy inspection. Properties of the UV40 product family include: 100% solids, no solvents or thinners required, minimal environmental impact MIL-I-46058C qualified versions, IPC-CC-830, and ROHS 2011/65/EC compliant…
Epoxy Adhesives Humiseal epoxy adhesives perform in the most challenging environments due to their robust curing mechanism and resulting strength. Epoxies are used in industries including electronics, automotive, and health…
…although it can be accelerated with a mild temperature increase. Full cure can be achieved in 30 minutes at 70oC or 60 minutes at room temperature. The cured 2C51 is…
…speeds. It’s unique, dual cure chemistry eliminates the need for hazardous solvents and thinners, while the secondary moisture cure provides assurance of cure in hard to reach or shadow areas….
…operations in the current year. Telecommunication infrastructure repair work in Texas and the southeast region of the U.S. following an impactful hurricane season resulted in increased demand for our pulling…
…Inc. for a purchase price of approximately $2,100,000, pending any working capital adjustments and excluding any future royalty payments to be made by the buyer. The transaction, entered today, is…
…$61.46 million in last year’s fourth quarter. Net income of $11.41 million in the current quarter increased $0.56 million, or 5%, from $10.86 million in last year’s fourth quarter. Earnings…
…$61.46 million in last year’s fourth quarter. Net income of $11.41 million in the current quarter increased $0.56 million, or 5%, from $10.86 million in last year’s fourth quarter. Earnings…
…commonly used by financial analysts and others in the industries in which the Company operates, and thus provide useful information to investors. Non-GAAP financial measures should be considered in addition…
…pound sterling against the U.S. dollar. This affects our U.K.-based operations, who make U.S. dollar-denominated sales into the Middle East.” Mr. Chase also commented, “Intelligently growing the business and reestablishing…
…in the gas distribution market. We had some significant bridge and highway projects in last year’s first quarter that did not repeat this year.” Kenneth J. Feroldi, Treasurer and Chief…
…British pound have resulted in significant transactional gains, recorded to other income (expense) in our financial results for the period. Chase acquired Spray Products (India) Private Limited in June. In…
…available cash on hand. Adam P. Chase, President and Chief Executive Officer, commented, “Resin Designs is a great strategic acquisition for Chase Corporation. It broadens our adhesives and sealants product…
Thank you for your interest in Zappa Stewart products and solutions. We will be in touch with you shortly. In the mean time, connect with us: YouTube | LinkedIn |…
…commonly used by financial analysts and others in the industries in which the Company operates, and thus provide useful information to investors. Non-GAAP financial measures should be considered in addition…
…British pound have resulted in significant transactional gains, recorded to other income (expense) in our financial results for the period. Chase acquired Spray Products (India) Private Limited in June. In…
…commonly used by financial analysts and others in the industries in which the Company operates, and thus provide useful information to investors. Non-GAAP financial measures should be considered in addition…
…in the gas distribution market. We had some significant bridge and highway projects in last year’s first quarter that did not repeat this year.” Kenneth J. Feroldi, Treasurer and Chief…
…$61.46 million in last year’s fourth quarter. Net income of $11.41 million in the current quarter increased $0.56 million, or 5%, from $10.86 million in last year’s fourth quarter. Earnings…
…pound sterling against the U.S. dollar. This affects our U.K.-based operations, who make U.S. dollar-denominated sales into the Middle East.” Mr. Chase also commented, “Intelligently growing the business and reestablishing…
…$61.46 million in last year’s fourth quarter. Net income of $11.41 million in the current quarter increased $0.56 million, or 5%, from $10.86 million in last year’s fourth quarter. Earnings…
…commonly used by financial analysts and others in the industries in which the Company operates, and thus provide useful information to investors. Non-GAAP financial measures should be considered in addition…
…available cash on hand. Adam P. Chase, President and Chief Executive Officer, commented, “Resin Designs is a great strategic acquisition for Chase Corporation. It broadens our adhesives and sealants product…
…Inc. for a purchase price of approximately $2,100,000, pending any working capital adjustments and excluding any future royalty payments to be made by the buyer. The transaction, entered today, is…
…operations in the current year. Telecommunication infrastructure repair work in Texas and the southeast region of the U.S. following an impactful hurricane season resulted in increased demand for our pulling…
…British pound have resulted in significant transactional gains, recorded to other income (expense) in our financial results for the period. Chase acquired Spray Products (India) Private Limited in June. In…